Once The Start/Pause Button Is Pressed The "Ps" Will Start To Blink; After The "Ps" Is Displayed, Press The Temp & Start/Pause Buttons Simultaneously For 3 Seconds. Please Wait Until The Smart Control Enabled Icon; Smart Control Enabled Icon - Samsung DV455 Series User Manual

Operating instructions, tips
5. Follow the instructions displayed on the phone to start the dryer
setup.
6. Once the "AP" is displayed you need to turn the knob counter
clockwise until "PS" is displayed. After the "PS" is displayed press the
Start/Pause button.

7. Once the Start/Pause button is pressed the "PS" will start to blink.

Once it starts blinking the phone will automatically start to connect.
8. After the "PS" is displayed, press the Temp & Start/Pause buttons
simultaneously for 3 seconds. Please wait until the Smart Control
Enabled icon [
starts blinking, press and hold the Signal on/off button for 3 seconds
to activate the Smart Control. If the Smart Control is enabled, the
Smart Control enabled icon [
DV455_02836F-08_EN.indd Sec3:56 DV455_02836F-08_EN.indd Sec3:56
] starts blinking. If the Smart Control enabled icon
] is turned on.
English - 56
Figure 6
Figure 7
Figure 8
Figure 9
2013-12-12 2013-12-12 5:12:10 5:12:10