Function Of Each Button - LG WT-H9506 Owner's Manual

14
F
unction of each Button
WATER TEMPERATURE
BUTTON (OPTION)
• Use to select Water
Temperature.
Pressing the button allows
you to select COLD
WARM (HOT&COLD)
HOT COLD
respectively.
AIR DRY
• This function is used to reduce the drying time
of the laundry by allowing air to circulate
within the bowl in order to reduce moisture
levels.It does not dry the clothes completely.
• Air dry selections light up in sequence as
follows.
60 90 120
• Press the button for 3 seconds to select and
press the Power botton to cancel the operation.
(refer to page 22)
SOIL LEVEL BUTTON
• This button allows you to
select the strength of the
wash action.
• Power option selections
light up in sequence as
follows Normal
Light Normal as the
button is pushed.
This can be selected for any
program.
• Adjustment can be made
while washing.
NOTE
* For optimizing the washing algorithm, the displaying time may change automatically during the wash cycle. As a guide
only, it may increase by up to 8 minutes or decrease by up to 4 minutes.
* The much detergent is detected then extra rinses will be added to improve wash results. This will result in an increase
in the wash time and the remaining time displayed will increase accordingly.
* The standard for the acceptable amount of detergent used is pre-set. This may vary from the amount a specific user
may actually put into the machine. This is not a problem unless Excessive amounts of detergent are used. Under
normal use the washer will adjust wash and rinse times accordingly.
* The sensor which detects a Detergent quantity is designed to detect synthetic based Detergent powder. If you use a
liquid detergent or soap flakes, or too much bleaching agent, the detecting ability of the sensor will be impaired.
WATER LEVEL BUTTON
• Use to select the proper amount of water in relation
to the weight and type of laundry.
• Automatically controlled, but can be selected
manually by pressing the WATER LEVEL Botton.
• WATER LEVEL is automatically selected for
FUZZY program.
The following settings are indicated as the button is
pushed
7 8 9
60 as the button is pushed.
TUB DRY
• Use this when you
want to dry the
empty tub after a
wash.
• This can be
Heavy
set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)
10 1 2 3 4 5 6
WASH. RINSE. SPIN BUTTON
• Use when wash, rinse, spin
times or amounts need to be
adjusted.
• If adjustments are needed
during the wash, press the
[start/pause] button before
making any changes.
• When the button is pressed
during washing, the
remaining time is displayed.
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining time
is indicated.
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication -When an error occurs, an error
message appears to indicate the abnormality.
For example, indicates that the lid is open.
7
CHILD LOCK FUNCTION
• Use to lock or unlock the
control buttons to prevent
settings from being
changed by a child.
To lock, push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process.
(refer to page 25 for full
operation and conditions)