Robitussin DH-975 Series Owner's Manual page 5

Warm moisture humidifier
Table of Contents

Advertisement

Available languages

Available languages

SET UP
NOTE: We recommend that the humidifier be disinfected prior to first use. Please
see WEEKLY CLEANING instructions.
• Select a firm, level, flat location - at least six inches (15 cm) from any wall for
proper air flow (Fig. 1). Place the humidifier on a water-resistant surface, as
water can damage furniture and some flooring.
The manufacturer will not accept responsibility for property damage caused by
water spillage.
FILLING
• Remove the water tank by grasping the handle and
pulling straight up. Set aside (Fig. 1).
• Turn the Water Tank upside down so that the Fill Cap
is facing up; unscrew the Fill Cap by turning it
counter-clockwise
• Fill the Water Tank with COOL tap water (Fig. 2).
Distilled water is not necessary as the water is purified
by the heating element. DO NOT USE HOT WATER.
Doing so may damage the humidifier.
• Replace the fill cap by turning it clockwise
NOT OVER TIGHTEN.
NOTE: WHEN CARRYING THE FILLED WATER TANK,
PLEASE USE THE HANDLE AND PLACE YOUR OTHER
HAND UNDER THE TANK FOR ADDITIONAL SUPPORT.
• Turn the Water Tank right side up. Position the tank
into the humidifier and push it into place (Fig. 3).
• Some water will flow into the Removable Tray when
the filled tank is properly in place.
• Once the filled tank has been positioned, do not
attempt to move the humidifier. If it has to be moved,
unplug the humidifier and remove the water tank first.
CAUTION: DO NOT POUR WATER INTO THE GRILLE ON
TOP OF THE HUMIDIFIER (Fig. 3). DOING SO MAY
DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL
INJURY.
and set aside.
Fig.1
Fig.2
. DO
Fig.3
6"
Grille

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for Robitussin DH-975 Series

Table of Contents