Tools And Materials Required; Package Contents - Atlas Diane Instructions Manual

TOOLS AND MATERIALS
REQUIRED
• Philips screw driver
• Standard, flat-head screw driver
• 11 mm wrench
• Step ladder
• Wire cutters

PACKAGE CONTENTS

Unpack your fan and check the contents. You
should have the following items:
a. Hanger bracket assembly
b. Ball / down rod assembly
c. Fan motor assembly
d. Metal blade with cage (decorative* or
safety**) or Wood blade
e. Receiver with 6 wire nuts
f. Transmitter+holder+2
g. Allen wrench
h. Package hardware
1) Mounting hardware:
wood screws (2), screws (2),
lock washers (2), washers (2),
star washers (2), wire nuts (3)
*If blade is metal and accompanied by safety
cage (see Diagram d-i): To reduce the risk of
injury to persons, install fan so that blade are
at least 7.0 Ft. above the floor in the US and
8.3 Ft./2.5 M above the floor in Canada.
**If blade is metal and accompanied
decorative cage (See
unguarded wooden blade (See Diagram d-iii):
To reduce the risk of injury to persons, install
fan so that blade is at least 10.0 Ft. above the
floor in the US and 10.0 Ft./3.05 M above the
floor in Canada.
\ \ \1\\
mounting screws
by
Diagram d-ii) or
1
d-i
~ ~. ~-iii
~e