Garrett GTI 2500 Owner's Manual page 33

modify this mode to his or her individual
specifications. These modifications will be
retained by the detector's memory when it
is switched OFF.
Many GTI 2500 owners will never use the
Custom mode, and when hunting in the
Discriminate mode will use only the pre-
set Coins, Jewelry, Relics or Zero modes.
Complete instructions for setting discrimi-
nation notches for any of these modes can
be found on the following pages of this
manual.
Note: When the detector is turned OFF and
then turned back ON again, it will begin
operations in the mode in which it was
previously operating unless the POWER
touchpad is pressed and held for about
five seconds (initializing a factory reset).
Factory settings will then be restored with
the detector operating in the Discriminate/
Coins Mode.
Graphic Target Imaging 2500 -