Av1/Av2 - Panasonic CQ-VX220L Operating Instructions Manual

AV1/AV2

Preparation:
¡Connect an optional external device to the AV1/AV2.
Source Selection
29
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
q Touch "Source Button".
d
Press [SOURCE] to change to desired mode.
To switch Operation Screen ON, touch the center of
touch panel.
Note:
¡ Every time the source is switched from iPod mode to
AV1 mode while iPod/iPhone video file is playing on
this unit, the still image of iPod/iPhone video file will
be displayed on the screen with AV1 mode.
However, this phenomenon is not a trouble with this
unit and iPod/iPhone unit.
Make sure to remove the cable connection (CA-
LDC100X, option) of front AV1 IN to iPod/iPhone and
connect the desired AV device to front AV1 IN connec-
tor using supplied conversion cable for AV1 IN when
you want to enjoy AV1 mode under above circum-
stance.
¡ You can set up the system so that the AV mode is not
selected (source skip). (
¡ If no operation is performed for 10 seconds or
touched, the operation buttons disappear.
¡ Only the pin jack of the supplied Conversion Cable for
AV 1 IN or a pin jack that has the same electrode
arrangement can be connected to the AV 1 IN termi-
nal. (See Fig. 1.)
¡ Use of the supplied Conversion Cable for AV 1 IN or an
audio pin jack that has the same electrode arrange-
ment also allows users to enjoy only music. In this
case, the screen background becomes black.
30
CQ-VX220L
w Touch
/
(AV1/AV2) on the
Source Selection
Screen.
a page 34)
Input
is
Source Button
DIMMER
IN-DASH 7" WIDESCREEN COLOR LCD MONITOR / DVD RECEIVER
CQ-VX220L
DIM
DIMMER
CQ-VD5005W
VOL TUNE/TRACK
POWER
SEL MUTE SETUP
PUSH
SOURCE SOURCE
[SOURCE]
<Fig. 1>
Audio (L)
Audio (R)
Video
Ground
TILT CLOSE
TEXT
TILT OPEN
AV1 IN
AV1 IN