Turn It On & Off; Battery Charging - Motorola MOTOKRZR K1 User Manual

Hide thumbs Also See for MOTOKRZR K1:
Table of Contents

Advertisement

3

battery charging

New batteries
are not fully
charged. Plug
the battery
charger into
your phone
and an
electrical outlet. Your phone might take
several seconds to start charging the battery.
When finished, your display shows
Charge Complete.
12
essentials
Tip: Relax, you can't overcharge your battery.
It will perform best after you fully charge and
discharge it a few times.
You can charge your battery by
connecting a cable from your
phone's mini-USB port to a USB
port on a computer. Both your
phone and the computer must be turned on,
and your computer must have the correct
software drivers installed. Cables and
software drivers are available in
Motorola Original data kits, sold separately.
turn it on & off
Caution: Some phones ask for your SIM card
PIN code when you turn them on. If you enter
an incorrect PIN code three times before the
correct code, your SIM card is disabled, and
your display shows SIM Blocked. Contact your
service provider.

Advertisement

Table of Contents
loading

Table of Contents