Remove The Hanger Metals; Remove The D-Board; Remove The C1-Board; Remove The C2-Board - Panasonic TC-P65VT25 Service Manual

8.16. Remove the Hanger metals

1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the Support metal. (See section 8.15.)
3. Remove the Hanger metals (L, R) fastening screws (×6
, ×2
each) and remove the Hanger metals (L, R).
4. Remove the V-bar connecting metal-bottoms (L, R) fas-
tening screws (×2
necting metal-bottoms (L, R) and the Bracket covers (L,
R).
each) and remove the V-bar con-

8.17. Remove the D-Board

1. Remove the AC inlet. (See section 8.1.)
2. Disconnect the flexible cables (D5, D20, D31, D32, D33
and D34).
3. Disconnect the connectors (D3 and D25).
4. Remove the screws (×4

8.18. Remove the C1-Board

1. Remove the Hanger metal R (See section 8.16.).
2. Remove the flexible cable holder fastening screws (×10
).
3. Disconnect the flexible cables (CB1, CB2, CB3, CB4 and
CB5).
4. Disconnect the flexible cable (C10).
5. Remove the screws (×5

8.19. Remove the C2-Board

1. Remove the Support metal. (See section 8.15.)
2. Remove the flexible cable holder fastening screws (×10
).
3. Disconnect the flexible cables (CB6, CB7, CB8, CB9 and
CB10).
4. Disconnect the flexible cables (C20, C21 and C26).
5. Remove the screws (×5
26
) and remove the D-Board.
) and remove the C1-Board.
) and remove the C2-Board.