Panasonic PT-DW740E Operating Instructions Manual page 91

3)
Press as to select [CONTROL PANEL] or
[REMOTE CONTROL].
4)
Press the <ENTER> button.
f The [CONTROL PANEL] screen or the [REMOTE CONTROL]
screen is displayed.
r [CONTROL PANEL] and [REMOTE CONTROL]
f You can set the limitation on the control from the control panel and
remote control.
[ENABLE]
[DISABLE]
Note
f When a button operation is performed on the device set to [DISABLE], the [SECURITY PASSWORD] screen is displayed.
Enter the security password.
f The [SECURITY PASSWORD] screen will disappear when the <MENU> button is pressed, or when there is no operation for approximately
ten seconds.
f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
Chapter 4 Settings — [SECURITY] menu
Enables all button operations on the projector body and remote control.
Disables all button operations on the projector body and remote control.
5)
Press as to select an item, and press the
<ENTER> button.
6)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
ENGLISH - 91