Making A Voice Call By Using Asr - Sanyo SCP-M1 User Manual

Making a Voice Call by Using ASR

With ASR, you can make a voice call by speaking a name, phone
number, or using a voice tag.
To make a voice call by speaking a name:
1.
Press
2.
Say "Call" to your phone.
3.
Say the full name of a contact in your Contacts (for example,
"John Jones").
4.
Say the phone type you'd like to call (for example, "Mobile").
Shortcut:
To execute several commands at a time, you can also say several
commands continuously (for example, "Call, John Jones, Mobile").
5.
The phone will automatically place a call if it recognises
your voice.
6.
When you are finished, press
Tip:
During an ASR operation, you can also select your desired items by using the
navigation key or pressing available softkeys on the display.
To make a call by speaking a phone number:
1.
Press
2. Say "Dial Number" to your phone.
3.
Say the phone number you wish to dial, one digit at a time.
Shortcut:
You can also say "Dial Number" followed by the number you want
to call.
4.
The phone automatically places the call if it recognises
your voice.
5.
When you are finished, press
Note:
If the phone does not recognise the name/number, the phone will find the
most likely match name/number and display a list of up to three names/numbers.
You will hear the voice prompt"Did you say..."followed by the matched
name/number.You can confirm the name/number by saying "Yes," or say "No" to
change the selection.
to activate the Command menu.
to activate the Command menu.
.
.
9. Voice Services 95