1. Manuals
  2. Brands
  3. Daewoo Manuals
  4. Washer
  5. DWD-UD123X
  6. Service manual

Daewoo DWD-UD123X Service Manual

Drum washing machine
Hide thumbs

Advertisement

Table of Contents

Service Manual

Drum Washing Machine
Model: DWD-UD123X
Caution
: In this Manual, some parts can be changed for improving,
their performance without notice in the parts list. So, if you
need the latest parts information, please refer to PPL(Parts
Price List) in Service Information Center (http://svc.dwe.co.kr).
S/M No. :
Mar. 2010

Advertisement

Table of Contents
loading

Related Manuals for Daewoo DWD-UD123X

Summary of Contents for Daewoo DWD-UD123X

  • Page 1: Service Manual

    S/M No. : Service Manual Drum Washing Machine Model: DWD-UD123X Caution : In this Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service Information Center (http://svc.dwe.co.kr).

  • Page 2: Table Of Contents

    DRUM WASHING MACHINE SERVICE MANUAL 1. What is Drum?................1 2. Washer Specification..............4 3. Operating Mechanism Diagram.............6 4. Each Part of Drum Washing Machine ...........8 5. Parts List By ASS'Y ..............10 6. Control Part Function Specification ..........25 7. Electronic Field Parts List and Specification........49 8.

  • Page 3: What Is Drum Washing Machine

    1. WHAT IS DRUM Washing Machine? 1. Drum Washing Machine Water consumption is reduced by using the power of the laundry falling (free-fall) created when rotating the drum. With temperature control system, this drum washing machine saves energy and improves washing performance at the same time.
  • Page 4 3. Power System LAUNDRY LAUNDRY LIFTER BLDC Pump Drainage Natural Drainage • DD Control: Direct drive type of direct connection between drum and motor • Rotation by powerful high-performance BLDC motor • Pump drainage type for built-in installation and Natural drainage...
  • Page 5 4. Major Functions 1 Washing When rotating drum after putting in the laundry and detergent into the drum, the laundry are rotated by protrusions (lifters) attached inside the drum. Washing is carried out with bending and impact actions generated by falling of the laundry to the bottom part of drum.

  • Page 6: Washer Specification

    2. Washer Specification 1. Product Specification 1 U129'S SERIES PARTS NAME CABINET F FRAME DOOR O PROTECT GLASS PANEL F CASE DETERGENT PLATE TOP CABINET BUTTON DIAL DIMENSION(WxDxH) 630mm(W) x 792mm(D) x 991mm(H) MACHINE WEIGHT 82 kg WATER CONSUMPTION WASH 91 / DRY 51 WASHING CONSUMPTION POWER SOURCE...
  • Page 7 2 U127'S SERIES PARTS NAME CABINET F FRAME DOOR O PROTECT GLASS PANEL F CASE DETERGENT PLATE TOP CABINET BUTTON DIAL DIMENSION(WxDxH) 630mm(W) x 792mm(D) x 991mm(H) MACHINE WEIGHT 82 kg WATER CONSUMPTION WASH 91 / DRY 51 WASHING CONSUMPTION POWER SOURCE 230V/50Hz, 110V/60Hz, 127V/60Hz POWER...

  • Page 8: Operating Mechanism Diagram

    3. Operating Mechanism Diagram 4. WATER SUPPLY PART • Cold Water: 3 holes Cold water, pre-washing Water • Hot Water: 1 hole Supply • Water supply box, hose 6. DRY PARTS • HEATER DRY : OPTION Detergent • BLOWER FAN Container •...
  • Page 9 1. CONTROL PART • Main PCB Electricity Input Noise Filter • Front PCB • Harness • Noise filter Program • Power Cord: 15A 2. DRIVING PART • BLDC motor • Drum • Bearing • Spider/ shaft • Tub Drum • Weight balancer Motor 3.

  • Page 10: Parts List By Ass'y

    4. Parts list by ass’y 1. PANEL F AS 1 U129'S series...
  • Page 11 Part Name Part Code Description Qt'y Remarks BUTTON LIQUID 3616641600 BUTTON RES 3616641700 BUTTON SELECT DETERGENT 3616641800 BUTTON ADD 3616641900 BUTTON FUNCTION 3616643200 SPRING BUTTON 3615116300 SUS, ID=9.5,d=0.5,L=15 DECORATOR WINDOW DISPLAY 3611692700 PANEL INNER 36142T1G00 PANEL OUTER 36142T1F00 BUTTON PS 3616641500 투명...
  • Page 12 1. PANEL F AS 2 U127'S series...
  • Page 13 Part Name Part Code Description Qt'y Remarks 투명 ABS WINDOW COURSE R 3615508700 투명 ABS WINDOW COURSE L 3615508800 BUTTON POWER 3616643100 ABS, 증착 DECORATOR BUTTON POWER 3611693300 BUTTON START 3616643000 ABS, 증착 DECORATOR BUTTON START 3611693200 SPRING BUTTON 3615116400 SUS, ID=15,d=0.7,L=20 PANEL INNER 36142T1J00...
  • Page 14 2. INLET BOX AS...
  • Page 15 Part Code Part Name Description Qt'y Remarks 3610528200 BOX INLET 3613274100 HOSE INLET EPDM 3618110600 NOZZLE TOP 3618110700 NOZZLE UNDER 36189L7000 UNIT PUMP AS DWD-U120R 220-240V 50/60HZ 3612799200 HARNESS FEED DRUMUP-2ND, AUTO-FEED SUB-HARNESS 3615304800 SUPPORTER BOX SBHG 1.2T 3610610500 BRACKET SENSOR 3614825900 SENSOR LIQUID A TAB#250+PIPE(59.5)
  • Page 16 3. CABINET F ASSY...
  • Page 17 Part Code Part Name Description Qt'y Remarks 3610813000 CABINET F SECD 0.8T, DWD-T120R 3614539800 PLATE HINGE SUPPORT SPG 0.8T, DWD-T110R 3612209800 FRAME DOOR I PP, DWD-T110R 3612904100 HINGE SAFETY LOCK NYLON66 361A113200 DOOR SAFETY LOCK 361A110600 DOOR GLASS GLASS (DWD-100DR) 3618304300 PROTECTOR GLASS ABS UT0510TNP...
  • Page 18 4. CABINET ASSY...
  • Page 19 Part Code Part Name Description Qt'y Remarks 3618103110 NOZZLE AIR PP, DWD-100DR 3612209300 FRAME TOP R DWD-T110R, GI 1.6T 3612209400 FRAME TOP L DWD-T110R, GI 1.6T 3610812900 CABINET SGCC 0.8T, DWD-T120R 3611425540 COVER BACK AS COVER BACK + PAD CABINET 3612209500 FRAME UPPER DWD-T110R, SBHG 1.2T...
  • Page 20 5. BASE U AS...
  • Page 21 Part Name Part Code Description Qt'y Remarks BASE U 3610393200 PP, DWD-T120R SUPPORTER LEG 3615303600 PO+도금, 3.0T FIXTURE LEG 3612006400 ABS, DWD-100DR SPECIAL BOLT 3616029000 10 X 1.25, 51MM FOOT 3612100600 BUTYL, DWD-100DR REACTOR 52G043J002 DWD-100DR, 4A 다른 끝단은 TUB AS에 체결 DAMPER FRICTION 361A700150 110N AKS ST=170-260 DL=197.5 LOW NOISE...
  • Page 22 6. TUB ASSY...
  • Page 23 Part Name Part Code Description Qt'y Remarks BALANCER WEIGHT 3616109000 DWD-T120R GASKET DRY 3612323900 EPDM NOZZLE SHOWER 3618104000 PP, DWD-100DR DAMPER PIN 361A700200 AKS D=14.5 DAMPER FRICTION 361A700110 AKS, 70N TUB FRONT 3618829800 FRPP, DWD-T120R DRUM FRONT 3617003101 SUS, 0.5T LIFTER WASH 361A400600 PP NANO-SILVER...
  • Page 24 7. DUCT B AS + DUCT PIPE AS...
  • Page 25 Part Name Part Code Description Qt'y Remarks UNIT FAN MOTOR 36189L3Z20 ISM-7780 6DWWA 24V. COVER DUCT 3611428700 ALDC DUCT B UPPER 361A202100 ALCOST 0.5T CLAMP CORD 3611203330 DABE-2, A=9, B=5,3, L=105 FAN AS 3611885900 DI33 FAN SCREW TAPPING 7122400811 T2S TRS 4x8 SPECIAL SCREW AS 3616030100 TAPTITE P, TRS 4*16, WASHER...
  • Page 26 8. PLATE TOP ASSY Part Code Part Name Description Qt'y Remarks 3614539910 PLATE T DWD-U12 3613559300 LABEL TOP UNIFICATION DWD-T'S PLATE TOP...
  • Page 27 9. Cover Plate AS Part Code Part Name Description Qt'y Remarks 3611430000 COVER LIQUID TANK 3615304900 SUPPORTER LIQUID TANK L 3615305000 SUPPORTER LIQUID TANK R 3611430100 COVER DETERGENT 3611430200 COVER PLATE 3612511700 GUIDE DETERGENT MAIN 3612511800 GUIDE DETERGENT PRE...

  • Page 28: Control Part Function Specification

    5. Control Part Function Specification 1. Function Specification 1) Sequence chart Division Time Normal Heavy stain Whites Memory Liquid DET. Power DET. Middle small Middle Middle Senising 20sec Water Supply 2min Pre. Wash 10min 8min Drain 1min Balancing Spin 2min Mid.
  • Page 29 Delicate Sports wear Blankel Sports shoes Tub clean Division Time Air wash Small Small Middle Small Medium Soal 30min Water Supply 2min 60min Washing 1 50min (Heating) 35min 30min 20min 25min Washing 2 20min 15min 8min 10min 15min Drain 1min Balancing Spin 2min Mid.
  • Page 30 Baby Care Steam soak Division Time Middle Small Middle Crease care 20sec Steam water supply 1min Steam washing 20min 15min 25min Steam washing 15min 10min 7min Finishing water supply 1min Finishing washing 25min Soal 30min Water Supply 2min 60min Washing1 50min (Heating) 35min...
  • Page 31 stocking lingerie Division Time Small Small Small Soal 30min Water Supply 1min 5min Washing1 3min 1min Drain 1min Balancing Spin 1min Mid. Spin 1min Water Supply 1min Washing 1 2min Drain 1min Balancing Spin 1min Mid. Spin 1min Water Supply 1min Washing 2 2min...
  • Page 32 2. Skill of each Sequence 2-1. Washing Sequence 1) Washing Sequence part Time Part LOAD SENSING Water Level Course HEATING Washing Main Decision Level Decision Level Decision Level Decision Level 8 or 10 min Soak High 30 min. 1 Prewash and Soak working previous main washing. 2 Decision Level’...
  • Page 33 1 Washing Heater isn’t reworking after reach decision temperature. 2 The washing time is divided into the heating time and the main washing time that follows it. The heating time is gone immediately after the heating is finished or stopped until the heating is completed. 3 The heating time for the standard course with water temperature of 40 degrees includes seven minutes without any heating in the early stage.
  • Page 34 4) Water supply 1 Depending on the course setting or load sensing, the water supply level is selected to be either low or extra low. 2 For powder DET injections, the main washing valve is opened and closed five times. 3 If liquid DET is selected, the liquid DET stirring motor operates 30 seconds for low levels and 20 for extra low levels.
  • Page 35 3) Sinse Sequence MOTOR On/OFF (sec) part Mid. Spin Level Water Temp. Rinse Time Mid. Spin r.p.m rpm. Water supply rinse height(mm) Normal Cold 3min 3min Medium 45 r.p.m 5/15 10/5 Whites Cold 3min 3min Small 45 r.p.m 5/15 10/5 Steam soak Cold 3min...
  • Page 36 2-3 Spin Sequence 1) Water discharge 1 It is done according to functional organization 3-5, water discharge sequence. 2) Balanced spin 1 Depending on the amount of water, 3 steps of unbalance checks are done. If the criteria is satisfied, then it advances to the next stage, spin R.
  • Page 37 2-4 Termination 1) Textile pulling 1 After the spin is completed, the laundry is taken off from the drum wall to prevent wrinkles. It lasts for 30 seconds. 2 The motor operation depends on the type of textile pulling. 3 No textile pulling is done for soft textile, sports shoes, hand cloths, stockings and lingerie. 2) Termination 1 The buzzer sound will be heard for 10 seconds after completing textile pulling.
  • Page 38 4) Motor conduction time for a drying cycle Textile pulling Drying Cooling Wrinkle free Cycle time (min) Heater off/on Low temperature 10/5 15/5 10/10 10/50 70/60 Low temperature (sports shoes) 10/5 2/30 2/30 70/60 Ironing 10/5 15/5 10/10 10/50 105/95 Standard 10/5 15/5...
  • Page 39 2) Steam heating 1 The heater operates until the target water temperature is reached. 2 Steam heating temperature setting Course Temperature setting Time setting Power saving 70ûC 15 min Standard 75ûC 15 min Strong 90ûC 20 min 3 When the target temperature is reached, the time set for steam heating is reduced. 3) Steam washing 1 The water temperature is maintained and the steam effect is maximized in this operation.
  • Page 40 3. Main Function of PCB Program 3-1. LOAD SENSING 1) Deciding the water level ① Normal, White, Eco-White Course will be followed by this process. ② Check the water level with dry laundry at the starting wash. ③ Check the water level by using motor output data during 20 sec, 65rpm. 2) Deciding Spin Starting Step.
  • Page 41 3-3. DOOR S/W 1) The working principle of Door S/W ① Door Locking Bimetal on (3 sec) --> solenoid (supply 20msec pulse 2 times) ② Door Unlocking Bimetal off --> solenoid(supply 20msec pulse, until lock) ③ After door locking all parts can work nomally. ④...
  • Page 42 Start/Hold Door unlock button, 2sec ON Water level is less than Drainage safety level? Cold water Temperature is less supply than 50℃? DISPLAY ‘LOCK’ OFF Door Open...
  • Page 43 5. TEST MODE 5-1. Testing Mode PCB and other electronic parts will be tested without water supply whether they are normal or not. 1) Process press power button --> press "SPIN" button 3 times with pressing "WASH" button --> 'L d' will be shown on LED --> Whenever pressing "TEMP"...
  • Page 44 6-1. Error Display 6-1. IE (Input Error) - Error in water supply 1) Conditions of Occurrence ① In case the designated water level is not reached in 5 minutes during water supply or re-supply 2) All LEDs are turned off and 'IE' blinks in18:88 display. 3) Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
  • Page 45 6-4. LE (Lock Error) - Door opening error 1) Conditions of Occurrence ① When intending to begin cycle by pressing start/ temporary stop button while door is opened 2) All LEDs are turned off and 'LE' blinks in 18:88 display. 3) Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
  • Page 46 6-7. E4 - Water leakage during washing 1) Conditions of Occurrence ① In case water level falls below re-supply even after 15 times of re-supply prior to finishing of water heating 2) All LEDs are turned off and 'E4' blinks in 18:88 display. 3) Error buzzer alarm is sounded for 10 seconds per every 10 minutes.
  • Page 47 6-9. Motor-related Error 1) E5 (DC-Link High Voltage) Error ① In case DC-link voltage to IPM increases to 450V or higher ② Motor operation is stopped and 'E5' is shown in display window. ③ Error buzzer alarm is sounded for 10 seconds per every 10 minutes. ④...
  • Page 48 3) H5 Error - Water temperature error in wool/ delicate course ① In case water temperature in wool/ delicate course is 45℃ or higher ② Error buzzer alarm is sounded for 10 seconds per every 10 minutes. ③ Error display is cleared when turning off/ on power. 4) H6 Error - Abnormality in washing heater ①...

  • Page 49: Electronic Field Parts List And Specification

    7. ELECTRONIC FIELD PARTS LIST AND SPECIFICATION 1. PCB PIN Relay (S/W) Relay (Heater S/W) 세탁전용일 경우 삭제됨. WF05: REACTOR iGBT Capacitor...
  • Page 50 2. VALVE INLET Classification 3-hole Valve and Hot Water Valve Code 3-hole: 3615415070, 3615415050, Hot Water: 3615415700, 3615414800 Color Gray 4320 ~ 5280 Ω Coil Resistance Supplying water for washing/ pre-washing and bleach Appearance Washing Water Input Structure Valve Rre-washing Water Input Valve Hot Water Input Valve M4×4...
  • Page 51 • Suspension of water supply Water supply not • Tap frozen carried out (IE) • Tap closed • Hot & cold water hose switched for connection • Low water pressure (0.2kgf/cm or less) • Blocking of water supply valve filter by foreign substances •...
  • Page 52 Symptoms of Inspection Inspection Method Inspection Result Problem Identified Repair Method Breakdown Spot Water 1) Suspension of water supply supply not 2) Water tap locked carried out 3) Cold-hot water hose incorrectly - Cold/ hot water hose switched -Defect in cold/ hot water -Assemble cold/ hot connected -Large amount of rust, sand and...
  • Page 53 3. Water Level Sensor 1) Spec. of Water Level Sensor HEATER SAFETY STEAM RESET RINSE ADD WATER OVERFLOW (kHz) 24.55 24.736 25.2 23.2 23.75 23.18 22.96 22.6 O/F: Forced drainage is RESET : Low: Small load of laundry, therefore considered to be necessary as water water level of 'low' level is high.
  • Page 54 4. POWER CORD 1) Specificafion Classification Rated Cord Thickness Color Code Type Length Remarks 250V/15A 1.5sq Gray 3611339340 LP-31 SJT 2.3m 125V/13A 1.5sq Gray 3611340410 UL.SJT 2.3m 250V/16A 1.5sq Gray 3611339930 EU-2P 2.3m 125V/15A 2.0sq Gray 3611339810 BSMI 2.3m 2) Assembly 4 embossed parts in cabinet ->...
  • Page 55 5. DOOR LOCK SWITCH PART CODE DESCRIPTION 3619047200 DOOR LOCK DL-S1 250V PTC-SOLENOID TYPE 3619041210 DOOR LOCK DL-S1 125V L6A BITRON 1) DOOR LOCK S/W...
  • Page 56 4) Diagnosis of Defect Error Symptoms Detailed Symptoms Cause Diagnosis of Defect Solution Mode – Ticking Tick' during initial Normal noise Normal sound generated during solenoid operation when noise operation and 'tick-tick' 'sliding CAM' is locked/ unlocked to close or open door. during temoprary suspension: 'DF' type only...
  • Page 57 1. Heater 1) Spec of Heater of Washing Machine Classification Parts name DUCT COVER FAN MOTOR HEATER DRY DUCT B LOWER VALVE INLET(DRY) THERMOSTAT THERMISTOR DUCT B UPPER FAN AS FUSE TEMPERATURE...
  • Page 58 2) Dry Function Diagram T : Thermistor (CONTROL DRY DUCT HEATER’S TEMPERATURE ) HEATER FAN MOTOR WATER SUPPLY CONDENSING DRUM DUCT DRAIN HOUSING While rotating DRUM, DRY HEATER applice heat to air and FAN blows it into DRUM evaporating water in the laundry. •...
  • Page 59 4) Dry Course COURSE DRY COURSE Heater control temperature is 60°C On/70°C Off LOW TEMP. Drying Time is 110min according to Load Sensing Data Heater control temperature is 95°C On/105°C Off, with good condition for ironing IRON Drying Time is 60min according to Load Sensing Data Cupboard Heater control temperature is 95°C On/105°C Off, drying time is 150 min STRONG...
  • Page 60 5) TROUBLE SHOOTING OF DRY SYSTEM HEATER DRY Function : heating the air during dry • FAILURE MODE : * "H7" - The air cannot be heated to 10°C during 2 min. • CHECKING METHOD : * Check the resistance of heater coil and replace with new one. Thermistor Function : sensing the air temperature.
  • Page 61 SWITCH THERMOSTAT(BIMETAL) function : control the duct temperature, if the temp reached over 150°C, all power supply will be cut. and if the temp go down 120°C the power will be ON. protecting overheating by cutting off heater power supply if the temperature rises over 150°C, and reoperating heater by connecting heater power supply if the temperature falls under 120°C.
  • Page 62 6) LACK OF DRY PERFORMANCE • Situation : after drying, the clothes still get wet. cause) The laurdry amount is more than the recommendation capacity 7.0kg. Condensing cold water is not supplied. Clogging Bellows Duct results in poor air circulation. checking method) part name checking point...
  • Page 63 • Situation : PCB shows "H7". cause) Dry heater is cut-off. Fuse temp. is cut-off. repaire method) replace the Dry heater. replace the Fuse temp. checking point part name checking results repaire method HEATER dry Heater is short or cut-off. replace the FUSE TEMPERATURE...
  • Page 64 • situation : PCB shows "E3". cause) FAN MOTOR can not work. countermeasures) Replace the Fan Motor. part name checking results repair method disassemble process of Fan Motor 1Disassemble Duct Cover As from Duct B As FAN MOTOR fan motor failure replace fan motor (Screw 4EA)
  • Page 65 R25 : 11.981KΩ ± 4.04% Washing Heater Temp. Sensor Table R80 : 1.704KΩ ± 3% B25/100 : 3760K ± 1% TEMP MIN NORMAL MAX TEMP MIN NORMAL MAX TEMP MIN NORMAL MAX TEMP MIN NORMAL MAX ℃ KΩ KΩ KΩ ℃...
  • Page 66 R40 : 26.065KΩ ± 3% Day Heater Temp. Sensor Table R100 : 3.3KΩ ± 11.1% B40/100 : 4025K ± 2% T(℃) Rmin Rcent Rmax T(℃) Rmin Rcent Rmax T(℃) Rmin Rcent Rmax 142.55 162.21 184.12 12.980 14.066 15.203 2.211 2.343 2.477 135.55 154.09...
  • Page 67 7. HEATER 1) Spec of Heater of Washing Machine W W A A S S H H IRCA IRCA IRCA IRCA MAKER 220V 230V 130V 110V RATED CONSUMPTION POWER 2000W 2000W 1000W 1000W 3612802400 3612802410 3612802440 3612802430 PART CODE D D R R Y Y E E R R IRCA IRCA IRCA...
  • Page 68 2) Breakdown Diagnosis Breakdown Cause Diagnosis Solution Symptoms Error Mode Washing Wiring short Check for short Connect the cut-off part. "H6" water not heated (common for Washing heater or Check for short: Normal if 23.3~25.7ohm between both Replace washing "H6" drum) temp.
  • Page 69 7. HEATER 1) Structure of BLDC Motor BLDC MOTOR 2) Power Transmission System of BLDC Motor...
  • Page 70 3) Specification Classification Item BLDC : DD Motor 1. General Rated Voltage Vm = 310 [Vdc], Hall IC Voltage 5 [Vdc] Insulating Structure Type B, insulator method External Appearance Shaft connection and stator connection structure, Air-gap : 1mm No. of Poles 24 poles, Core: 36 slots, Layer: [30mm] 2.

  • Page 71: Wiring Diagram

    8. WIRING DIAGRAM...

  • Page 72: Trouble Shooting Regarding Drain

    9. TROUBLE SHOOTING REGARDING DRAIN 1) Structure of Dran Parts by TUB HOSE DRAIN I HOUSING VALVE DRAIN MOTOR VALVE AIR AS 2) Checking Methods • Situation : * "OE" is shown on PCB. * Not finishing drain during 10 min. * The water level can not reach to RESET POINT during 10 min of drain.

  • Page 73: Installation Guide

    10. INSTALLATION GUIDE 1) Related Parts and Configuration FIGURES PARTS NAME REMARKS FIXTURE UP/DOWN AS FIXTURE UP AS (3612008200) : L= 109mm FIXTURE DOWN AS (3612008300) SPECIAL FIXTURE UP FIXTURE SPECIAL SCREW UP DOWN SCREW : L=143mm DOWN ① Remove Fixture UNIT SERVICE WRENCH UP/DOWN AS ②...
  • Page 74 3Please install the DRUM WASHING MACHINE properly on even and hard floor as below. 4Adjust the level of washer using LEG ADJUST AS. Adjusting Method Remarks If turned CW, the LEG ADJUST AS moves the washer upward. If turned CCW, the LEG ADJUST AS moves the washer downward.

  • Page 75: Attention Point With Servicing

    11. ATTENTION POINT WITH SERVICING Item Part Name Checking Point 1 Replacing Thermistor Thermistor Dry Keep the Packing from seperating (Hold Packing when replacing) Keep the Packing from folding 2 Replacing Duct B As DUCT B AS & Check the sealing between Duct Pipe & Duct B AS &...
  • Page 76 DAEWOO ELECTRONICS CORP. 1-2, Jeo-dong 1(il)-ga, Jung-gu, Seoul, Korea C.P.O. BOX 8003 SEOUL, KOREA TELEX: DWELEC K28177-8 CABLE: “DAEWOOELEC” S/M NO. : PRINTED DATE: Mar. 2010...
  • Page 77 V V I I S S I I O O N N C C R R E E A A T T I I V V E E , , I I N N C C . . 서울 종로구 통의동 6번지 이룸빌딩 4층 담 당 이영배 님 M O D E L DWD-UD123X (S/M) 접 수 2010.03.02 총 76페이지 1차 2차 일...

Table of Contents