Sony DAV-TZ215 Operating Instructions Manual page 58

[SUBWOOFER]
[YES]
Note
• When you change the [CONNECTION] setting, the
[STANDARD] of [SPEAKER FORMATION]
setting remains the same, but the other settings of
[SPEAKER FORMATION] return to
[STANDARD].
x [DISTANCE]
Set the distance of all the speakers from the
listening position.
For the best possible surround sound, place all
speakers at the same distance from the listening
position. The distance can be between 1.0 to 7.0
meters for the front speakers, and 0.0 to 7.0
meters for the center speaker and surround
speakers.
If you cannot place the center speaker at the
same distance, you can move the center speaker
up to 1.6 meters closer to the listening position.
If you cannot place surround speakers at the
same distance, you can move the surround
speakers up to 5.0 meters closer to the listening
position.
[FRONT] 3.0 m: Set the front speaker distance.
[CENTER] 3.0 m: Set the center speaker
distance (up to 1.6 meters closer to the front
speakers).
[SURROUND] 3.0 m: Set the surround speaker
distance (up to 5.0 meters closer to the front
speakers).
x [LEVEL (FRONT)]
You can adjust the sound level of the front
speakers, center speaker, and subwoofer. You
can set the parameters from –6.0 dB to 0 dB for
[L/R], and from –6.0 dB to +6.0 dB for
[CENTER] and [SUBWOOFER]. Be sure to set
[TEST TONE] to [ON] for easy adjustment.
[L/R] 0.0 dB: Set the front speaker level.
[CENTER] 0.0 dB: Set the center speaker level.
[SUBWOOFER] +2.0 dB: Set the subwoofer
level.
58
GB
x [LEVEL (SURROUND)]
You can adjust the sound level of the surround
speakers. You can set the parameter from –6.0
dB to +6.0 dB. Set [TEST TONE] to [ON] for
easy adjustment.
[L/R] 0.0 dB: Set the surround speaker level.
x [TEST TONE]
You can adjust the sound level of the speakers
by using the [TEST TONE] function.
[OFF]: The test tone is not emitted from the
speakers.
[ON]: The test tone is emitted from each speaker
in sequence while adjusting the level.
Adjust the sound level as follows.
1
Set the [TEST TONE] to [ON].
2
Press C/X/x/c repeatedly to select the
desired speaker and the level, then
press .
3
Repeat Step 2.
4
Press C/X/x/c to set [TEST TONE] to
[OFF] after adjusting the speaker level.