Output Resolution (D7700U Only); Auto Signal; Fan Control - Panasonic PT-D7700U Operating Instructions Manual

Output resolution
(D7700U only)
Pictures projected onto a screen (for SXGA) with a 5:4
aspect ratio can be displayed with the SXGA
resolution.
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press "ENTER" button.
The OPTION screen will be displayed.
Select "OUTPUT RESOLUTION" with
the buttons.
OPTION
OUTPUT RESOLUTION

AUTO SIGNAL

FAN CONTROL

P IN P
FUNC1
DVI EDID
PASSWORD
:MENU SELECT
:CHANGE
Switch between "SXGA+" and "SXGA"
with the buttons.
SXGA+ (1 400 x 1 050): For projecting pictures
SXGA (1 280 x 1 024): For projecting pictures
SXGA+
ON
NORMAL
OFF
P IN P
EDID2 (PC)
onto a screen with an
aspect ratio of 4:3.
onto a screen with an
aspect ratio of 5:4.
Auto signal
When unregistered signals are to be input frequently
because the unit is used at conferences or other
venues, the screen display position can be adjusted
automatically without having to press the AUTO SET
UP button on the remote control each time.
Press the "MENU" button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press "ENTER" button.
The OPTION screen will be displayed.
Select "AUTO SIGNAL" with the
buttons.
OPTION
OUTPUT RESOLUTION
AUTO SIGNAL
FAN CONTROL
P IN P
FUNC1
DVI EDID
PASSWORD
:MENU SELECT
:CHANGE
Switch between "ON" and "OFF" with
the buttons.
If unregistered signals are input when "ON" is
selected, auto setup will be initiated automatically.
Fan control
When using the projector over 1 400 m (4605.3')
above sea level, set to "HIGHLAND".
FAN CONTROL
SXGA+
ON
NORMAL
OFF
P IN P
EDID2 (PC)
NORMAL
HIGHLAND
73