Ec-Declaration Of Conformity - Jonsered CS2156 Operator's Manual

EC-declaration of conformity

(Applies to Europe only)
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws Jonsered
CS 2156, CS 2156W, CS 2156WH, CS 2156C, CS 2156CWH, CS 2159, CS 2159W, CS 2159WH, CS 2159C and CS 2159CWH
from 2002's serial numbers and onwards (the year is clearly stated in plain text on the type plate with subsequent serial number),
are in conformity with the requirements of the COUNCIL'S DIRECTIVES:
of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied: EN292-2,
CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificates for EC type examination
in accordance with annex VI, have the numbers: 404/03/1000 – CS 2156, CS 2156W, CS 2156WH, CS 2156C, CS 2156CWH,
404/00/761 – CS 2159, CS 2159W, CS 2159WH, CS 2159C, CS 2159CWH
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with annex
V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The certificates have
the numbers: 01/161/052 – CS 2156, CS 2156W, CS 2156WH, 01/161/053 – CS 2156C, CS 2156CWH, 01/161/038 – CS 2159,
CS 2159W, CS 2159WH, 01/161/028 – CS 2159C, CS 2159CWH.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 6 October 2003
Bo Andréasson, Development manager
´®z*x}J¶6¢¨
´®z*x}J¶6¢¨
38 –
English
TECHNICAL DATA