Page 1
• Easy ‘How to use’ guides for storage heaters • Service and repairs • Where to buy our products • Literature downloads • Heating requirement calculator Visit ‐ www.dimplex.co.uk/support A division of GDC Group Ltd Registered No: 1313016 England VAT GB 287 1315 50004 Millbrook House Grange Drive Hedge End Southampton SO30 2DF EEE Producer Registration Number –...
The thermostat also has a frost protection setting marked ‘∗’. This setting Positioning the heater is useful in areas such as garages to prevent frost damage. If the thermostat is set to its minimum setting ∗, the heater will cycle ON and Always ensure that the heater is stood on a firm, level base near to, but OFF to maintain a temperature of approximately 5°C to help protect not directly beneath, a suitable mains supply socket.
Page 4
Turbo Fan model (DX 300TF The turbo fan is used to boost the airflow around the room. The fan will circulate the heat around the room to reach the desired temperature more quickly. On this model once power is supplied to the heater & the timer is in an on position the heater can be set to run on 2kW output by setting the turbo switch in its off position ( neon off ).
Page 5
Hampshire. SO30 2DF Republic of Ireland Tel. 01 8424833 [c] Glen Dimplex UK Limited All rights reserved. Material contained in this publication may not be reproduced in whole or in part, without prior permission in writing of Glen Dimplex UK Limited.