Vertical Through Existing Chimney - Napoleon GDS25N Installation And Operating Instructions Manual

17
3.8

VERTICAL THROUGH EXISTING CHIMNEY

This appliance is designed to be attached to a 3" co-linear aluminum fl ex
vent system running the full length of a masonry chimney.
The fl ex liner accommodates any contours of a masonry chimney,
however, it is necessary to keep the fl exible liner as straight as possible.
The inlet air collar of the termination cap must be connected to the air
intake pipe.
Use Simpson Duravent Chimney Liner Termination Kit -
EXHAUST
923GK (Base plate and Co-Linear to Co-Axial Adaptor.
Follow manufacturers (Simpson Dura-Vent) installation
FLUE
AIR
instructions.
FLEX
INTAKE
LINER
When installing the appliance to this system, Duravent vent
components must be used. You must start with a Duravent
adaptor, GDS924N, directly off the appliance. The GDS924N
is only available at your local authorized dealer.
40 FEET
MAX.
3 FEET
MIN.
W415-0547 / G / 12.15.10