Controls - NextBase 402G Instruction Manual & Recipes

CONTROLS

1. MEMORY CARD SLOT (located under dust cover)
Insert MicroSD memory card here.
2. LENS
3. LED LAMPS
Turn on/off within Setup menu to enable
enhanced night time recording.
4. SPEAKER
5. HD OUT SOCKET (located under dust cover)
For use with High Definition Cable.
6. RESET
Press to reset the iN-CAR CAM.
7. LED INDICATOR
Car adaptor connected and iN-CAR CAM switched on::
PURPLE = Battery charging
RED = Battery charged
PURPLE & BLUE FLASHING = Battery charging & recording
RED FLASHING = Recording
Note:
The LED will appear BLUE for a short period on shut-down,
battery charge during does not occur during this period.
The battery will only charge when the iN-CAR CAM is
connected to power source and switched on.
Car adaptor dis-connected:
RED = Power On
RED FLASHING = Recording
8. UP
Press to navigate up within menus and to move
to the next file when in playback mode
04
1
7
8
9
10
1 1
16 17
3
2
4
12
19 20
18
9. SOS FILE PROTECTION
'One touch button' to protect current file in event
an emergency situation.
10. MICROPHONE
11. DOWN
Press to navigate down within menus and to move
to the previous file when in playback mode.
12. SCREEN
13. MENU
Press to open the Menu within current mode.
Press twice to open the Setup menu.
14. EXPOSURE (EV)
Press to toggle through exposure settings.
15. MODE
Press to select: Video / Photo / Playback modes.
16. MINI USB 2.0 SOCKET
Connect car power cable / USB cable here.
17. AV OUT SOCKET (located under dust cover)
For use with AV Cable (sold separately)
18. MOUNTING POINT
Attached supplied windscreen mount here.
19. POWER
Press and to turn on / off the iN-CAR CAM.
20. START / STOP & OK
Press start, stop a recording or to confirm selection.
5
6
13
14
15