Panasonic Diga DMR-EX77 Operating Instructions Manual page 68

Changing the unit's settings
(continued)
Refer to the control reference on page 64.
Tabs
Connection
AV2 Settings (Set to match the connected equipment.)
≥Press [OK] to show the following settings.
(continued)
AV2 Input
Set to "RGB/Video" or "RGB" when receiving or recording
RGB output from external equipment.
AV2 Connection [For]France,[Italy[and[Spain[
This setting is fixed with "Ext" if you set "TV System" to
"NTSC" (➡ 72).
Ext Link
This setting cannot be made when the "TV System" is set to
"NTSC" (➡ 72).
Active Antenna [For]Germany]
Set this item when using indoor antenna.
Others Remote Control (➡ 22)
Clock (➡ 73)
Power Save
≥Refer to the following when "Power Save" is set to "On".
–"FL Display" is automatically set to "Automatic" (➡ 67).
–The "Quick Start" function does not work. (It is automatically
turned to "Off".)
–When the unit is off, Pay TV programmes cannot be watched
on the TV because the signal from the connected decoder is
not looped through.
Quick Start
The Quick Start feature enables this unit to be ready to start
recording as quick as approx. 1 second
start recording soon after deciding you want to record something.
§
Only when recording to the HDD or DVD-RAM.
≥Startup takes up to a minute when:
–You play a disc or start recording to discs other than DVD-RAM.
–You want to make other operations.
–The clock has not been set.
DivX Registration
≥You need this registration code to purchase and play DivX Video-on-Demand (VOD) content (➡ 39).
System Update
In order to update this unit's software, the EPG download, and to
support system changes made by broadcasts, this unit
periodically performs software updates.
≥Press [OK] to show the following settings.
EPG Download in Standby
Software Update in Standby
EPG/Software search period
Selects the time to automatically perform EPG download and
updates when the unit is set to standby mode. This can only
be set when "EPG Download in Standby" and "Software
Update in Standby" is set to "On".
≥If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not
turn your unit off during the update. This could result in the
loss of data. A message shows that the update has finished.
If a new software version is not going to be broadcast for the
next few days, a corresponding message also appears.
Initialize
≥Press [OK] to show the following settings.
Shipping Condition
All the settings except for the ratings level, ratings password and time settings return to the factory preset. The timer recording
programmes are also cancelled.
Default Settings
All the settings other than the programmed channels, time settings, country settings ([For]France,[Italy[and[Spain[), language
RQT8860
settings, disc language settings, ratings level, ratings password, remote control code, return to the factory presets.
68
Menus
§
after turning it on. You can
Options (Underlined items are the factory presets.)
≥RGB/Video ≥RGB
≥Video ≥S Video
≥Decoder:When a decoder is connected to descramble the
scrambled signals (e.g., C+decoder).
≥Ext:
When the VCR or a digital satellite receiver is
connected.
≥Ext Link 1: When a digital satellite receiver which transmits a
special control signal recordings via the 21-pin Scart
cable is connected.
Start and stop timings of recording are controlled by
the control signal.
≥Ext Link 2: When external equipment with a timer function is
connected.
When it turns on, recording starts.
When it turns off, recording stops.
≥On Select this when you will use indoor antenna.
≥Off:
≥DVD 1 ≥DVD 2
≥On: Power consumption is minimized when the unit is turned to
standby (➡ 86).
≥Off:
(If "Quick Start" is set to "On", "Power Save" is automatically
turned to "Off".)
≥On
≥Off:
Standby power consumption is less than when this is set
to "On".
(If this is set to "On", "Power Save" is automatically turned to
"Off".)
≥Update data and EPG download information is sent by an
unscheduled digital broadcast. In order to receive these
updates, you must be able to receive digital broadcasts.
≥An update will take approximately 60 minutes. While the update
is in progress, "SW-DL" appears on the unit's display. You
cannot operate the unit until the update is complete. Removing
the AC mains lead while the update is in progress may damage
the unit.
≥An EPG download will take approximately 30 minutes. While the
EPG download is in progress, "GUIDE" appears on the unit's
display. The EPG download can be interrupted by switching on
the unit, since the download will continue in the background.
≥On: When you set this unit to standby mode, EPG data is
downloaded automatically.
≥Off
≥On: When you set this unit to standby mode, software updates
are downloaded automatically.
≥Off
≥Automatic:
The unit will give priority to searching for EPG
download and update data at midnight.
≥02:00–06:00
≥06:00–10:00
≥10:00–14:00
≥14:00–18:00
≥18:00–22:00
≥22:00–02:00
≥If applicable update data is found, press [2, 1] to select "Yes"
and press [OK].
≥Yes ≥No
≥Yes ≥No
≥DVD 3