Keep this MANUAL, SET-UP DISC, PROGRAMMING CARD, and TEST CARD for future reference as they contain important information. TABLE OF CONTENTS 1. BATTERY INSTALLATION 2. SETTING UP THE CONTROLLER • METHOD 1 - PROGRAMMING THE UNIT USING THE MANUFACTURER CODES •...
BATTERY INSTALLATION • The battery compartment is located on the back of the unit. • Unscrew and lift the cover away from the battery compartment. • Insert 3 “AA” batteries as shown. • For longest life and best performance use only alkaline batteries.
SETTING UP THE CONTROLLER Your InteracTV unit can be set-up to be played with 3 different DVD players. There is a 3-position memory switch and a blank label located on the back of the unit to indicate which DVD player you want to program.
• Remember to slide the 3-position memory switch to the desired memory slot. • Turn your TV and DVD player ON. • Insert the InteracTV disc into your DVD player. • You will watch a brief message and tutorial, which is then followed by a PROGRAMMING SCREEN.
Page 6
Step 2 – PROGRAMMING YOUR CONTROLLER • Insert the blue PROGRAMMING CARD into the InteracTV controller. When the card is properly inserted, the green light on the bottom right of your controller will blink twice. LED light • Refer to the list of MANUFACTURER’S CODES listed in the enclosed USER’S MANUAL and find the correct code...
Page 7
“METHOD 2 - PROGRAMMING THE UNIT USING MANUAL SEARCH”. Step 4 – READY TO PLAY! • Remove the TEST CARD from the InteracTV controller and insert an ACTIVITY CARD. • Now you can begin play!
Step 1 – PREPARING YOUR CONTROLLER • Remember to slide the 3-position memory switch to the desired memory slot. • Remove the InteracTV disc from your DVD player and turn the power OFF. Step 2 – PROGRAMMING YOUR CONTROLLER • Insert the blue PROGRAMMING CARD into your InteracTV controller.
Page 9
800 number found in the back of this MANUAL for further assistance. Step 4 – READY TO PLAY! • Insert the InteracTV DVD into your DVD player and make sure your TV is turned ON. • Now remove the programming card and insert one of the play cards.
HOW TO PLAY InteracTV comes with a Controller, a DVD, 3 Activity Cards, and a storage case. Additional DVD’S and Activity Cards are sold separately. • Insert the DVD into your DVD player. • Insert an Activity Card, picture side up, into the slot on the face of the InteracTV controller.
Page 11
• Your child selects an answer by pressing the picture or symbol on the Activity Card that corresponds with the same picture or symbol on screen. InteracTV is so simple to use, that after a little help from you, your child will be able to play for hours.
Nickelodeon, SpongeBob SquarePants and all related titles, logos, and characters are trademarks of Viacom International Inc. Created by Stephen Hillenburg. InteracTV is a mark of Beep Telecommunications and Computing, L.L.C. Used under license. Fisher-Price, Inc., a subsidiary of Mattel, Inc., New York, New York 10010 U.S.A.