Using The Snooze Function; Using The Sleep Function; Listening To Your Ipod; Listening To The Radio - Iluv IMM153 Instruction Manual

Desktop alarm clock with bed shaker for your ipod
Hide thumbs Also See for IMM153:
Table of Contents

Advertisement

OPERATIONAL INSTRUCTIONS

Using the Snooze Function

After Alarm is ON, press SNOOZE/DIMMER button to temporarily deactivate the alarm which will
activate again after 7 minutes. Press POWER/MODE/AL OFF to switch off the Alarm.

Using the Sleep Function

Press SLEEP/MEMORY and the sleep indication will turn ON. Press the SLEEP button again to
change and select from "15" to "30", "60", "90", "120", or "OFF". Selectinig "OFF" disables the sleep
function. While the sleep function is activated, press SLEEP/MEMORY once and the remaining
sleep time will be shown. Press SLEEP/MEMORY again to select other sleep times.
IMPORTANT:
1. Occasionally, files on your iPod may become corrupted. This may cause erratic behavior with
your iLuv products. Apple recommends visiting their website www.apple.com to obtain
instructions on resetting or restoring your iPod to factory settings.
2. It is imperative to your iPod and the built-in universal dock that you use the correct dock
adapter for your iPod and that the dock adapter fits appropriately into the built-in universal
dock. Ignoring these rules can cause severe damage to your iPod. Please refer to the section
"Installing the Dock Adapter" to install the dock adapter properly before operating iMM153
with your iPod.

Listening to your iPod

1. Press POWER/ MODE/AL OFF to Power on the unit. To select iPod mode, press POWER/ MODE/
AL OFF again until the "iPod" icon is shown on the top of display.
2. While the iPod mode is on, insert your iPod to the universal dock and press
3. Press
/PRESET to control the play and pause functions.
4. Press
or
to select previous or next song.
5. Press and hold
or
to rewind or fast forward currently playing music from iPod.
/ to adjust the VOLUME level of this unit as desired.
6. Press the
7 | iLuv
OPERATIONAL INSTRUCTIONS

Listening to the Radio

Note: Unwind and extend antenna to its full length. It may be necessary to adjust the direction of this wire antenna until
you find the position that provides the best reception for your favorite FM stations.
1. Press POWER/MODE/AL OFF to Power on the unit. To select radio, press POWER/MODE/AL OFF
2. FM radio frequency will show on the display.
3. Tune to the desired frequency as follows:
4. Preset FM stations in the tuner memory
/PRESET to play.
Note: The saved preset station will be lost if the AC Power is interrupted and the backup battery is not inserted.
iMM153 | V10M10_IM_EN_06122009
until "FM" icon is shown on the top of display.
a) Automatic Tuning
i) Press and hold
or
for three (3) seconds. Auto tuning will start.
ii) The tuner will search the frequency for the next strong station and stop on that
station. Repeat this procedure until the tuner stops on your desired station.
b) Manual Tuning
Repeatedly press
or
until the frequency of the desired station appears on the display.
After entering the radio mode for about 3 seconds, the display will show the time mode
again. Press TIME SET again to show the radio frequency.
This unit includes a 10 station preset memory. Store up to 10 FM stations in the tuner memory
for immediate recall. The procedure for storing stations in memory is as follows:
a) Preset FM channel
i) Follow instructions above to select the first station you wish to
memorize and the FM frequency will show on the display. For example: FM 91.8 MHz.
ii) Press and hold SLEEP/MEMORY, the preset channel number "P-1" begins flashing on the
display
iii) Press
/PRESET to select preset channel (P-1 to P-10)
iv) Press SLEEP/MEMORY to confirm.
v) Repeat step i) to iv) to until you have memorized up to 10 stations. Press
listen to preset FM channel P-1 to P-10 at FM radio mode.
/PRESET to
iLuv | 8

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents