Indicator And Warning Lights - Yamaha YW50Z Owner's Manual

Two-stroke engine oil level warning light<IXE>
INSTRUMENT AND CONTROL FUNCTIONS
To unlock the steering
1
1
2
3
ZAUM00**
4
1. Turn.
2. Release.
5
Push the key in, and then turn it to "OFF"
while still pushing it.
6
7
8
9

Indicator and warning lights

2
ZAUM00**
1. Turn signal indicator light "5"
2. High beam indicator light "&"
3. 2-stroke engine oil level warning light
"7 "
Turn signal indicator light "4
This indicator light flashes when the turn
signal switch is pushed to the left or right.
High beam indicator light "&
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU11004
1
2 3
20
30
40
10 20
30
50
10
km/h
60
40
0 0
MPH
0000001
EAU11020
4 4 4 6 4 6 " 6 6 6
EAU11080
& & " &
&
3-20 3-2
2-stroke engine oil level warning
7 7 " 7
7
light "7
The warning light comes on if the key is
in the "*" position or when the engine oil
level in the 2-stroke engine oil tank is
low during operation. If the warning light
comes on during operation, stop imme-
diately and fill the oil tank with
YAMALUBE 2 or an equivalent 2-stroke
engine oil. The warning light should go
off after the 2-stroke engine oil tank has
been refilled.
TIP
If the 2-stroke engine oil level warning
light does not come on when the key is
in the "*" position or does not go off after
the 2-stroke engine oil tank has been
refilled, have a Yamaha dealer check the
electrical circuit.
NOTICE
Do not operate the vehicle until you
know that the 2-stroke engine oil level
is sufficient.
EAU1044D
EAU32442
ECA12720