Table of Contents
Advertisement
Automatic Time Set
1. When the unit is plugged in to a standard AC Outlet (120V~60Hz) for the first
time, it will automatically begin searching for the time.
The letters "CT" will flash on the LCD display to indicate that the unit is search-
ing for the time.
If the letters "CT" do not appear on the LCD Display, press and hold the Standby/
AL Off/Reset Button for 5 seconds to reset the unit
. To cancel the automatic time set during the search, press the Standby/AL Off/
Reset Button. To resume the automatic time set, press and hold the Standby/AL
Off/Reset Button for 5 seconds to reset the unit.
. A time zone will appear on the LCD Display. If the time zone is incorrect, press
the /HR/MIN/Tuner/ Buttons change the time zone.
. Once the correct time zone is selected, press the CLK SET Button to set the time.
The unit will update the time daily.
Manually Setting the Time
1 Turn the unit off by pressing the
Standby/AL Off/Reset Button.
Press and hold the MEM/CLK Set
Button.
The hour of the time will begin to
blink, indicating it can be changed.
Press the /HR/MIN/Tuner/
Buttons to adjust the blinking hour.
Press the MEM/CLK Set Button.
The minute of the time will begin to
blink, indicating it can be changed.
5 Press the /HR/MIN/Tuner/
Buttons to adjust the blinking minute.
6 Press the MEM/CLK Set Button.
6
AM Time Indicator
STANDBY
AL OFF/
RESET
Advertisement
Table of Contents
