Motorola hint QA30 User Manual page 65

pair with headset, handsfree
device, or computer
Note: If you want to use your Motorola Bluetooth
headset with both an audio device and your phone,
use your phone's Bluetooth menus to connect the
phone with the headset. If you establish the
connection by pressing a button on the headset, or if
you allow the headset to connect automatically by
turning it on, you may experience unexpected results.
Before you try to connect to another Bluetooth
device, make sure your phone's Bluetooth power is On
and the device is in pairing or bonding mode. (See the
user guide for the device you are attempting to pair
with.) You can connect your phone with only one device
at a time.
Find it: u
Bell > Settings > Bluetooth
1 If your phone lists the device you want, scroll to
the device and press
D
.
If you want to connect to a new device, scroll to Add
New Device and press
discoverable mode. When your phone shows Place
the device you are connecting to in discoverable mode, press
Your phone lists the devices it finds within its
range. If your phone is already connected to a
device, it lists that device and identifies it with a
%
(in-use indicator). Scroll to the device you want
and press OK.
2 If the device requests permission to bond with
your phone, press YES or PAIR and enter the device
PIN code to create a secure connection with the
device. (The PIN code is typically set to 0000.)
Note: See the instructions that came with your
device for the device's PIN code and other
information about the device.
When the connection is made, the
indicator or a Bluetooth message displays in the home
screen.
D
. Place the new device in
à
(Bluetooth)
connections
D
.
63