HTC One User Manual page 104

104 Fun and entertainment
7. Point HTC One towards the TV and tap the blinking button on the screen.
8. Tap Yes if HTC One was able to turn on your TV, and then follow the onscreen
instructions to continue setting up the other devices.
§ If the TV didn't turn on, tap No. HTC One will try another remote control
profile.
§ If a matching remote control profile isn't found, you'll need to manually set
up the remote control.
Customizing the remote control buttons
Are the predefined buttons not to your liking? You can change any button.
To avoid conflict with the EPG, it is recommended to not change any of the buttons
on the Number pad tab.
1. Open the TV app.
2. Tap > > Button setup.
3. Tap a button to configure.
Red buttons (except for the Record button) have not been configured.
4. Align the IR port on HTC One with the IR port on your device's remote control.
Your HTC One and your device's remote control should be less than 5 cm apart.
5. On your device's remote control, press and hold the button you want to add to
HTC One.
6. Tap the blinking onscreen button to test the button.
7. Tap Yes to finish setting up the button.
If you tap No, you'll be prompted to try again.
8. Press until you exit the Button setup mode.