English Manual English 2 Device Overview HDD ACTIVE LED POWER LED LOCK HOLE HDD GATE HDD ACTIVE LED Mode Select USB 3.0 Power Switch DC Jack Hardware Installation 1. Unlock upper and lower covers, then open the door.
English Manual English 3 2. Place one or two hard drive(s) in the slot. Make sure the SATA connector is lined up with the connector inside the Mobile Rack. 3. Carefully push the hard drive into the Mobile Rack, so that the drive’s SATA connector is seated securely, then close the door and lock it.
English Manual English 4 Disconnecting from the Computer Use Windows’ Safely Remove Hardware utility to turn off or disconnect the USB 3.0 Dual 2,5“ SATA Mobile RAID. Windows 7 1. Verify that the HDD access LED is OFF before proceeding 2.
Page 5
Kabeln verwendet werden. LINDY Herstellergarantie LINDY gewährt für dieses Produkt über die gesetzliche Regelung hinaus eine zweijährige Herstellergarantie ab Kaufdatum. Die detaillierten Bedingungen dieser Garantie finden Sie auf der LINDY Website aufgelistet bei den AGBs. WEEE (Waste of Electrical and Electronic Equipment),...