Sony Handycam DCR-SR68 Operating Manual page 37

Confirm that your camcorder is
not connected to the computer.
Turn on the computer.
Log on as an Administrator for
installation.
Close all applications running on the
computer before installing the software.
Place the supplied CD-ROM in
the disc drive of your computer.
The installation screen appears.
If the screen does not appear, click
[Start] ‚ [Computer] (in Windows
XP, [My Computer]), then double-click
[SONYPMB (E:)] (CD-ROM) * .
* Drive names (such as (E:)) may vary
depending on the computer.
Click [Install].
Select the country or region.
Select the language for the
application to be installed, then
proceed to the next screen.
Read the terms of the license
agreement carefully. If you agree
to the terms, change
then click [Next] ‚ [Install].
Turn on your camcorder, then
connect the camcorder to the
computer using the supplied USB
cable.
The [USB SELECT] screen appears on
the camcorder screen automatically.
Touch the one of the media types
displayed on the screen to make
the computer recognize your
camcorder.
[
disk (DCR-SR68/SR88)
[
memory (DCR-SX44/SX63)
[
Click [Continue] on the computer
screen.
Follow the on-screen instructions
to install the software.
to , and
USB CONNECT]: Internal hard
USB CONNECT]: Internal
USB CONNECT]: Memory card
The displayed recording media differ
depending on the model.
If the [USB SELECT] screen does not
(MENU) ‚ [Show
appear, touch
others] ‚ [USB CONNECT] (under
[OTHERS] category).
Depending on the computer, you may
need to install third party software. If
US
37