Samsung HG28NC690 Installation Manual page 11

✎
Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off.
✎
When connecting an external device, match the color of the connection terminal to the cable.
USB (HDD/1.0A) / CLONING
1
– Connector for software upgrades and Media Play, etc.
– Service connection.
HDMI IN 1, 2, 3(ARC),
2
✎
No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
✎
Use the HDMI IN 4(DVI)
adapter (DVI to HDMI) for the video connection and the
devices may not or should not need a
✎
It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet the
compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version, contact
to the Samsung customer care center. Refer to page 52 for the information of the Samsung customer care center.
3 LAN: Connect to a wired LAN using CAT 7 cable.
ANT IN (AIR/CABLE)
4
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
DIGITAL AUDIO OUT
5
AUDIO OUT: Connects to the audio input jacks on an Amplifier/Home Theater.
6
7 EX-LINK: Connect this jack to the jack on the optional RJP (Remote Jack Pack). This will allow you to connect external
devices (Camcoder, PC, DVD players etc.) easily.
COMPONENT IN / AV IN
8
– Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as VCRs.
– Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on A/V or
Component devices.
– The
COMPONENT IN
– Connect component video cables (not supplied) to the component jacks ("P
other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks and cables.
– If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and
connect the DVD to the component jacks ("PR", "PB", "Y") on your TV.
– The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr.
– For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other
ends to corresponding audio out jacks on an external device.
– When your are connecting a composite (AV) device to
AV IN1 [Y/VIDEO]
9 VOL-CTRL: Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOLCTRL port.
VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the
0
DATA
!
– Used to support data communication between the TV and the SBB or STB.
– Connects using RJ-12 TV type plugs.
IN: Connects to the audio out jack of an external DVI device using a 1/8th inch stereo phone jack cable.
DVI AUDIO
@
Some DVI devices may not or should not need this connection audio.
4(DVI): Connects to the HDMI jack of a device with an HDMI output.
jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
DVI AUDIO IN
(OPTICAL): Connects to a Digital Audio component.
jack is also used as the
jack (Green/Yellow) .
Variable port (RCA).
PC/DVI AUDIO IN
connection for audio.
jack.
VIDEO 1
AV IN1 [Y/Video], connect the video cable (Yellow) to the
jacks for audio. Some DVI or HDMI
", "P ", "Y") on the rear of your TV and the
R B
11
English