Table of Contents
Advertisement
6
7
8
9
10
Doc ID: 01080001
Make sure the hose is secure, and then turn
the spa on by pushing the on/off button
located under the footrest.
Run the pump until the water stops draining
out of the hose. It is normal for a low volume
of water to run out of the jets while the spa is
draining.
Turn the spa off by pushing the on/off button
located under the footrest.
Close the discharge valve handle and
disconnect the drain hose from the discharge
valve.
Pull the drip pan out about halfway and
slowly open the discharge valve. Drain the
remaining water into the drip pan and pour
the water into a drain or sink. Repeat this
until there is no more water draining out.
Once this is done, close the discharge valve
handle.
Revision: F
Technical Support: 800-626-6912
Page 12
Advertisement
Table of Contents
