Table of Contents
Advertisement
Section
02
Before you start
Note
Switch your engine ON or set the ignition switch
to ACC ON before pressing RESET in the follow-
ing situations:
! After completing connections
! When erasing all stored settings
! When resetting the unit to its initial (factory)
settings
Demo mode
The feature demo automatically starts when
you select Source Off for the source and con-
tinues while the ignition switch is set to ACC
or ON. To cancel the feature demo, press and
hold MUTE/ . Press and hold MUTE/
again to restart. Operating the feature demo
while the car engine is turned off it may drain
the battery power.
Important
Failure to connect the red lead (ACC) of this unit
to a terminal coupled with ignition switch on/off
operations may lead to battery drain.
Adjusting the response
positions of the touch panels
(Touch Panel Calibration)
If you feel that the touch panel keys on the
screen deviate from the actual positions that
respond to your touch, adjust the response po-
sitions of the touch panel. Refer to Adjusting
the response positions of the touch panels
(Touch Panel Calibration) on page 69.
About this manual
The English screens are used for the explana-
tions in this Owner's manual. When Русский
is selected in Selecting the menu language on
page 59, the display language will switch to
Russian.
8
En
Advertisement
Table of Contents
