LEDs
1
1
Power/Status
Connections
3
2
2
Power Receptor
3
LAN (PoE) Port
4
Reset Button
2
Hardware Overview
Solid Red
Indicates the access point has malfunctioned.
Blinking Red
This LED will blink during boot-up.
Solid Green
Indicates that the DAP-2330 is working properly.
Blinking Green
This light will blink green during data transmission.
Connect the supplied power adapter.
Connect to a Power over Ethernet (PoE) switch or router via an Ethernet cable.
Press and hold for five seconds to reset the access point to the factory default settings. Press and
hold for one second to reboot the access point.
4
DAP-2330 Install Guide