Firewall - Zte MF29A User Manual

Hide thumbs Also See for MF29A:

Table of Contents

Enlarged version

Select Enable, click Apply, the WPS settings are shown in the fol-

lowing figure:

WPS Summary, WPS Progress and WPS Status are all shown in

the figure.

To set WPS, select WPS mode, the two modes are described below:

•

PIN: Set the client's PIN code in Client PIN field.

•

PBC: Press the WPS button of the router or select PBC, and

then click Apply. Press WPS button on the client wireless

adapter within two minutes, and the negotiation process will be

established.

Firewall

You may setup firewall rules to protect your network from virus,

worm and malicious activity on the Internet.

Notes:

You can set the maximum 10 filtering items for MAC/IP/Port Filter-

ing, URL Filtering and Port Forwarding.

MAC/IP/Port Filtering

Select Settings > Firewall > MAC/IP/Port Filtering, the MAC/IP/

Port Filtering is shown in the following figure:

If you select Enable, the filter settings will appear:

Default Policy: Set how to handle the packet if none of the rules

•

matches.

•

MAC address: Set the MAC address that will be filtered.

•

Dest IP Address: Set the destination IP address that will be

filtered.

•

Source IP Address: Set the source IP address that will be

filtered.

•

Protocol: Set which protocol will be used for filtering.

Table of Contents