Toshiba Satellite M200 User Manual page 153

C
This procedure does not affect the settings.
* In this computer, CD-ROM refers to the DVD-ROM, CD-R/RW or CD-RW/
DVD-ROM drives.
NOTE: PC card HDD boot is not supported.
To change the boot drive, follow the steps below.
1. Hold down F12 and boot the computer.
2. Use the up/down cursor keys to select boot device you want and press
ENTER.
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the computer.
2. The selection method above does not change the boot priority
settings in HW Setup.
3. If you press a key other than one of those above or if the
selected device is not installed, the system will boot accord-
ing to the current setting in HW Setup.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in sleep mode, you can turn on
the computer by pressing any key. It is effective only for the internal keyboard
and only when the computer is in sleep mode.
Enabled
Disabled
USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your operating
system does not support USB, you can still use a USB mouse and keyboard by
setting the USB Legacy Emulation item to Enabled.
Enabled
Disabled
User's Manual
Selects the CD-ROM*.
Enables Wake-up on Keyboard.
Disables Wake-up on Keyboard. (Default)
Enables the USB Legacy Emulation. (Default)
Disables the USB Legacy Emulation.
HW Setup and Passwords
7-5