Warnings And Call Out Output; Warnings And Their Appropriate Countermeasures - Mitsubishi Electric DX-TL950E Installation And Operation Manual

Warnings and CALL OUT output

Warnings and their appropriate countermeasures

#1 Options in the CALL OUT options column:
• Selectable : CALL OUT output can be selected/de-selected on the menu.
• Fixed : a CALL OUT signal is emitted without prior selection of this function using the menu.
• None : no CALL OUT signal is emitted, but a warning indicator will appear on screen.
CALL OUT signal output can be stopped by pressing the WARNING RESET button.
Warning Display
REC/FULL • MAIN HDD recordable
capacity is full.
• SUB HDD recordable
REC/SUB FULL
capacity is full.
COPY/FULL • Media recordable
REST/FULL capacity is full.
REC/REM • The remaining HDD capa
-city has reached the value
set in HDD REMAIN.
COPY/SIZE/ • The data that is being
DATA ERROR copied exceeds the
REST/SIZE/ capacity ofCompact Flash
DATA ERROR Card, or there is no
original data.
It restored from the
Compact Flash of a
different format.
COPY/ • Error has occurred in the
MEDIA ERROR media as Compact Flash.
REST/
MEDIA ERROR
• No inserted media as
COPY/NO MEDIA
REST/NO MEDIA Compact Flash.
NO SIGNAL • Video signal was lost for
more than 5 seconds
(The warning will during recording.
indicate the number
of the non-functioning
camera. )
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Warnings and CALL OUT output
Status Countermeasure
• When the warning is
cancelled, the unit will start
over-writing the oldest data
remaining in the hard disk
drive.
• Copy data as necessary.
• Replace with new media.
• Replace media if necess
-ary.
• Copy data as necessary.
• Set the copy/restore
range again.
• Replace with new media.
• Check media in recording
device. (Insert the media
if there is none.)
• Insert the media.
• Check whether the unit
and camera are properly
connected, and that electri
-city is on.
• Check whether the visual
signal is being properly
outputted.
• Check to see if there is a
camera set for operation
with no video signal input.
CALL OUT
Canceling
Code
output
the warning
Press the WNG1100 Selectable
WARNING
RESET button.
WNG1101
Press the
WNG3100 None
WARNING WNG4100
RESET button.
Press the Selectable
WNG1200
WARNING (MAIN)
RESET button.
WNG1201
(SUB)
Press the WNG3701 None
WARNING
WNG4701
RESET button.
Press the
WNG3702 None
WARNING WNG4702
RESET button.
Press the WNG3703 None
WARNING
WNG4703
RESET button.
Stop recording.
WNG54 #3 Fixed
Output video
signals.
Press the
WARNING
RESET button.
page
#1
47
72,73
-
-
72,73
72,73
-
11,72
11,72
15
36
22,23,
41-43
87