Setting An Unlock Pattern - Samsung Galaxy Ace II e User Manual

Portable quad-band mobile phone
Table of Contents

Advertisement

5. Follow the on-screen instructions.
6. When prompted to speak and unlock command, tap
and repeat the phrase four times.
7. Once complete, tap Done.

Setting an Unlock Pattern

Creating a screen unlock pattern increases security on the
phone.
The feature is paired with a backup PIN code that acts as a
backup to the pattern lock. If you forget your pattern, you can
regain access to the device by entering a PIN code.
1. From the Home screen, press
Settings ➔ Lock screen.
2. Tap Screen lock ➔ Pattern.
3. Read the instructions then tap Next.
4. Draw your pattern by touching your first on-screen point.
Then, without removing your finger from the screen, drag
your finger over adjacent points until the gray trace line
overlaps each point and they are highlighted with a
green circle.
222
and then tap
5. When you have connected at least four dots in a
vertical, horizontal or diagonal direction, lift your finger
from the screen and tap Continue.
6. Confirm the new pattern by redrawing it and then
tapping Confirm. The Unlock pattern is set.
7. Enter the backup PIN code and tap Continue.
8. Reenter the PIN to reconfirm the previous entry and
tap OK.
To see the pattern on the screen as you trace it with your
finger:
1. From the Home screen, press
Settings ➔ Lock screen.
2. Tap the selection box beside Make pattern visible.
Changing the Screen Lock Pattern
This feature allows you to change the previously stored unlock
pattern and update it if necessary. This process is similar to
changing your password from time to time.
1. From the Home screen, press
Settings ➔ Lock screen.
2. Tap Screen lock.
3. Retrace your current pattern on the screen.
and then tap
and then tap

Advertisement

Table of Contents
loading

Table of Contents