Table of Contents
Advertisement
2
Press
( Home).
3
Press
to select [Setup] > [Sound]
> [TV speakers] > [Auto EasyLink].
»
The TV speakers are turned off
automatically when content from an
Easylink compliant system is detected.
4
Press
to select [Setup] > [Sound]
> [TV speakers] > [On] to disable
system audio control and enable the TV
speakers.
Note
•
If you select
[TV speakers] > [Off], the TV
speakers are muted.
Connect an ampliÀ er
An amplifi er such as Home theatre System or
AV receiver can be used to play audio from an
Easylink compliant device connected to your
TV.
An amplifi er can be connected in the following
different ways :
•
An amplifi er with only one HDMI output.
Audio can be played by the amplifi er
from the device or TV.
HDMI Device
1
SPDIF OUT /
Analogue Audio
•
Amplifi er with one HDMI input and
several HDMI outputs. Audio can
be played by the amplifi er via HDMI
connector from your device.
32
EN
HDMI
HDMI
SPDIF OUT/
Analogue audio
Amplifier
HDMI Device
HDMI
Note
•
You must map the audio input from the
connected device to your TV in order to use
this feature.
Enable remote control pass-through
1
Enable one-touch play and one-touch
standby between easylink compliant
devices by following the instructions
in the previous section (see 'Enable or
disable EasyLink' on page 31 ).
2
Press
3
Press
HDMI connector from your home menu.
4
Press
5
Press
press OK.
»
2
Note
•
Easylink compliant device must be connected
to the TV via HDMI connector.
Amplifier
( Home).
to select a device with
OPTIONS.
to select [Enable RC pass] and
RC pass-through is enabled on the
selected device.
HDMI
Hide quick links:
Advertisement
Table of Contents
