Page 1
NV-CTP36-V2 Color Touch Screen Installation Guide...
Page 2
- Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for assistance. En55022 Class-B NuVo Technologies En55024 NV-CTP36...
NV-CTP36 Package Contents Description Quantity NV-CTP36 -V2 Color Touch Pad, 3.6” display Touch Pad mounting plate Additional Tools Needed- Phillips Screwdriver USB-A to Mini-B pin USB cable USB-A to USB-B Cable (Renovia only) DB9 Serial Cable (Grand Concerto only) Cutting tool (drywall saw, utility knife) Measuring device (ruler, tape measure) Pencil Level...
Page 4
Fig. E Step 3- Wire Run If you are replacing an existing NuVo Control Pad you may skip this step. Otherwise run CAT5 wire from the location of the NuVo Grand Concerto EZPort to the desired location of the Color Touch Pad.