Table of Contents
Advertisement
Press the
7.
8.
Wait several seconds as the remote generates a security encryp-
tion and sends it to the Control Center. The horn honks to indicate
Pairing is complete.
If pairing is not successful press and release the
and then repeat steps 6 and 7.
Pairing will exit if:
•
Step 7 is not completed within 60 seconds
•
The doors are closed
•
The ignition is turned off.
Remote Programming
Enter programming, press and hold the
transmit LED turns on to indicate the Main Menu is accessed.
Exit programming or go back to a previous menu, press and release
the
button. When programming is exited the transmit LED turns off.
Remote Features
Enter programming to access the main menu as previously explained,
then from the main menu, press and hold the
remote operation features, 2 transmit LED flashes indicate the remote
features menu is accessed. Press the buttons indicated in the tables
below to set the feature option.
The remote control will flash the Transmit LED to indicate the setting.
Feature
Keypad Lock
© 2013 Directed. All rights reserved.
button.
Button Press
button for 8 seconds, the
Single Flash
Double Flash
Auto
Off *
button once
button to access the
13
Hide quick links:
Advertisement
Table of Contents
