Table of Contents
Advertisement
Adjust the play function volume of the external audio source
The play function volume of the external audio source can be changed via the vol-
ume control on the radio.
Depending on the connected audio source, the output volume on the external au-
dio source can be changed.
You can also change the input sensitivity of the AUX socket
for the play function volume of the external audio source to adapt to other audio
sources or to avoid distortions of the play function volume.
WARNING
On no account place an external audio source on the dash panel. You could
■
make sudden manoeuvres in the passenger compartment and injure the occu-
pants.
On no account place an external audio source close to the airbags. You could
■
be thrown back in the passenger compartment by the airbags being deployed
and injure the occupants.
You must not hold the external audio source in the hand or on the knees
■
while driving. You could make sudden manoeuvres in the passenger compart-
ment and injure the occupants.
Always guide the connection cable of the external audio source in such a
■
way that is does not restrict you when driving.
CAUTION
The AUX socket must only be used for audio sources!
Note
Your radio has no control over the level setting of the external source. Make
■
sure that the highest quality is achieved by a suitable combination of input sensi-
tivity and output sensitivity of the external source (volume control). You will find
detailed information for this setting in the operating instructions of the units.
If an external audio source is connected via AUX, which is equipped with an
■
adapter for external power supply, it can occur that the audio signal is interrup-
ted. This depends on the quality of the adapter which is used.
The loudspeakers in the vehicle are matched to a power output of the radio of
■
30°W.
8
CD player
» page 4
in order
Ð
Advertisement
Table of Contents
