Dorel Juvenile Group GMA 2010 Instruction Manual page 19

PrEParInG sEat to FIt your cHIlD
stEP 1
step 1 :
Insert one buckle tongue as shown above.
step 2 :
Insert the second buckle tongue as illustrated
above. Listen for a 'clIcK'.
step 3 :
Remember to always pull up on the harness straps
to make sure buckle is locked properly.
WarnInG
Do not usE sHoulDEr straPs oF unEQual HEIGHts.
corrEct usE
Ensure the harness is attached to the splitter plate. Ensure
the harness is pulled through the plastic mould & trim all the
way and correctly tensioned. Ensure harness straps and
adjuster strap is not twisted.
stEP 2 stEP 3
IncorrEct usE
19