Flash; Scenes; Capture Images In A Sequence - Nokia N96 User Manual

To return to the viewfinder to capture a new image,
press the capture key.

Flash

The flash is available only in the main camera.
The camera of your device has an LED flash for low light
conditions. Select the desired flash mode from the
active toolbar: Automatic
( ), and Off ( ).

Scenes

Scenes are only available in the main camera.
A scene helps you to find the right colour and lighting
settings for the current environment. The settings of
each scene have been set according to a certain style
or environment.
The default scene in the image mode is Auto, and in
the video mode Automatic
To change the scene, in the active toolbar, select
modes and a scene.
To make your own scene suitable for a certain
environment, scroll to User
Options > Change. In the user defined scene you can
adjust different lighting and colour settings. To copy
the settings of another scene, select
© 2008 Nokia. All rights reserved.
( ), Red-eye ( ), On
(both indicated with
Scene
defined, and select
Based on scene
mode and the desired scene. To save the changes and
return to the scenes list, press Back. To activate your
own scene, scroll to
and select Select.

Capture images in a sequence

The sequence mode is available only in the main
camera.
To set the camera to capture images in sequence (if
enough memory is available), in the active toolbar,
select Sequence mode.
To start capturing images in a quick sequence,
selectBurst, and press and hold the capture key. The
device captures images until you release the key or
until the memory runs out. If you press the capture key
briefly, the device captures six image in a sequence.
To capture two or more images in defined intervals,
select the desired time interval. To capture the images,
).
press the capture key. To stop capturing images, select
Cancel. The number of images taken depends on the
available memory.
The captured images are shown in a grid on the
display. To view an image, press the scroll key. If you
used a time interval, only the last captured image is
shown on the display. You can view the other images
in the Photos application.
User defined, press the scroll key,
67