Panasonic LUMIX DMC-S3P Service Manual page 37

Service Manual
Diagrams and Replacement
Parts List
Digital Camera
Model No.
DMC-S1P DMC-S1EP DMC-S3P
DMC-S1PC DMC-S1GA DMC-S3PC
DMC-S1PR DMC-S1GC DMC-S3PR
DMC-S1PU DMC-S1GD DMC-S3PU
DMC-S1EB DMC-S1GF DMC-S3EB
DMC-S1EE DMC-S1GK DMC-S3EE
DMC-S1EF DMC-S1GN DMC-S3EF
DMC-S1EG DMC-S1GT DMC-S3EG
Colour
[DMC-S1]
(A)...........Blue Type (except PR/PU/EB/EF/GD/GK/GT)
(K)...........Black Type
(N)...........Gold Type (only P)
(P)...........Pink Type (only GA/GC/GD/GF/GT)
(PA).........Pink Type (only P/PR/PU/EB/EE/EG/EP/GN)
(S)...........Silver Type (except EB/EF/GD)
(W)..........White Type (only GA/GC/GD/GF/GK/GN/GT)
Table of contents
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage Chart ........................................................................... S-2
S2.1. Flash P.C.B. .......................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Overall Block Diagram .......................................................... S-3
S3.2. Flash/Top Block Diagram ...................................................... S-4
S4. Schematic Diagram .................................................................. S-5
S4.1. Interconnection Diagram ....................................................... S-5
S4.2. Flash Schematic Diagram ..................................................... S-6
S4.3. Top Schematic Diagram ........................................................ S-7
S4.4. S1 CCD Flex Schematic Diagram ......................................... S-8
S4.5. S3 CCD Flex Schematic Diagram ......................................... S-9
S5. Print Circuit Board .................................................................. S-10
S5.1. Flash P.C.B. ........................................................................ S-10
S5.2. Top P.C.B. ........................................................................... S-11
S5.3. S1 CCD Flex P.C.B. ............................................................ S-12
S5.4. S3 CCD Flex P.C.B. ............................................................ S-13
DSC1101009CE
DMC-S3EP
DMC-S3GA
DMC-S3GC
DMC-S3GD
DMC-S3GF
DMC-S3GK
DMC-S3GN
DMC-S3GT
[DMC-S3]
(A)...........Blue Type (only P/PC/EB/EE/EG/EP/GK/GN)
(K)...........Black Type
(R)...........Red Type (except GD)
(V)...........Violet Type (except PR/PU/EE/GD/GT)
(W)..........White Type
S6. Replacement Parts List .......................................................... S-15
S7. Exploded View ....................................................................... S-20
S7.1. Frame and Casing Section.................................................. S-20
S7.2. Packing Parts and Accessories Section (1) ........................ S-21
S7.3. Packing Parts and Accessories Section (2) ........................ S-22
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
COMPONENTS IDENTIFIED WITH THE MARK
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as "
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
Circuit name being connected.
OFTR FEP
Name of Signal
S-1
HAVE THE SPECIAL CHARACTERISTICS
" mark.
This signal is connected
to the FEP schematic diagram.