Memory Channel Programming; Clearing A Memory Channel - Icom COMMUNICATION RECEIVER IC PCR100 Instruction Manual

4
MEMORY CHANNELS

Memory channel programming

Each memory bank (1 to 20) can hold up to 50 channels and
can store the information listed below.
Bank name, memory name, frequency, mode, filter, atten-
uator, tuning step, select memory scan, skip channel, tone
squelch and remark.
D Using the multi-function receiver screen
q Click the [BANK ] or [BANK ] button to select a memory
bank to be programmed.
w Click the [CH ] or [CH ] button to select a memory chan-
nel to be programmed.
e Set a frequency and mode, etc. that you want to memo-
rize.
r Click the [MW] button to program the displayed frequency
into the memory channel.
• "NONAME" appears in the memory channel indicator.
D Using the memory list screen
q Call up the memory list screen if it is not displayed.
• For the multi-function receiver screen, click the memory list
screen button or select 'Memory List' from the [View] menu.
• For the simple function receiver screen, click the [MENU] button
and select the 'Memory List.'
w Click [BANK #]/[BANK $] or select a bank name with [$]
to select a memory bank.
24
e Click a cell in the [Frequency] column and the desired
memory channel line.
r Input the receive frequency from the keyboard, then push
[Enter].
• Input frequency first in order for other data to be input.
t Set other data such as mode, tuning step, etc., if desired.
• Double-click the desired cell, select the desired item and double-
click the selection.
e Select desired cell

Clearing a memory channel

D Using the multi-function receiver screen
q Select a desired memory channel to be cleared with
[BANK ]/[BANK ] and [CH ]/[CH ].
w Click the [MCL] button to clear the memory channel con-
tents.
t Set other data, if desired