Siemens Gigaset 4010/ 15 Service Manual page 24

Information and
Communication Products
6.8.3.2 Second alternative (Comfort handset)
Second alternative with G2000 opening tool (slow, but housing could possibly be
reused (not for swap); please check hooks on the housing carefully after opening).
The location of the hooks compared to Classic is different (especially belt clip hook).
Insert opening tool G2000 in the above described position between both hooks (red
rectangles). After inserting push the tip of the tool downwards (red arrow) and press
the other end down (green arrow) in order to lift the upper case shell. If necessary
insert a second opening tool G2000 in the hook area (red rectangles) and try so to lift
the upper case shell.
Do the same on the opposite side of the handset.
Insert the tool in the above described position and try to disengage the belt clip hook.
Do the same on the opposite side of the handset.
Confidential 24 ICM D CC ST
J. Junggebauer
Version 2.1 05/01