Using Eco Mode; Shooting With The Fe Lock - Canon IXUS 145 User Manual

[!] Off
For shooting without the flash.
• If a blinking [ ] icon is displayed when you press the shutter button
halfway in camera-shake inducing, low-light conditions, mount the
camera on a tripod or take other measures to keep it still.

Shooting with the FE Lock

Just as with the AE lock (= 49), you can lock the exposure for the flash
shots.
1
Set the flash to [h] (=
2
Lock the flash exposure.
z z Aim the camera at the subject to shoot
with the exposure locked. With the
shutter button pressed halfway, press the
<r> button.
z z The flash fires, and when [(] is
displayed, the flash output level is
retained.
z z To unlock FE, release the shutter button
and press the <r> button again. In this
case, [(] is no longer displayed.
3
Compose the shot and shoot.
• FE: Flash Exposure

Using Eco Mode

This function allows you to conserve battery power in Shooting mode.
When the camera is not in use, the screen quickly darkens to reduce
battery consumption.
Still Images
5 6).
1
Configure the setting.
z z Press the <q> button, and then press the
<q><r> buttons to choose [
z z [ ] is now shown on the shooting
screen (= 103).
z z The screen darkens when the camera
is not used for approximately two
seconds; approximately ten seconds
after darkening, the screen turns off.
The camera turns off after approximately
three minutes of inactivity.
2
Shoot.
z z To activate the screen and prepare for
shooting when the screen is off but the
lens is still out, press the shutter button
halfway.
Before Use Before Use
Basic Guide Basic Guide
Advanced Guide Advanced Guide
Camera Basics Camera Basics
Auto Mode Auto Mode
Other Shooting Other Shooting
].
Modes Modes
P Mode P Mode
Playback Mode Playback Mode
Setting Menu Setting Menu
Accessories Accessories
Appendix Appendix
Index Index
57