Table of Contents
Advertisement
Main Menu
Table of Contents
Lights
6.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
7.
Turn on the headlights to test the
new bulb.
8.
Put the light assembly into the
bumper. Tighten the mounting
bolt.
298
Maintenance
Replacing Rear Bulbs
1.
Open the tailgate. Use a
screwdriver protected with a cloth
to pry open the two covers.
2.
Remove the two screws and
remove the rear light assembly
from the rear pillar.
3.
Determine which of the four bulbs
is burned out: stop/taillight, turn
signal/hazard lights, side marker
light, or back-up light.
4.
Remove the socket by turning it
one-quarter turn counterclockwise.
5.
Remove the burned out bulb. To
remove the stop/taillight, back-up
or side marker light bulb, pull the
bulb straight out of its socket. To
remove the turn signal/hazard
light bulb, push it in and turn it
counterclockwise until it unlocks.
Advertisement
Chapters
Table of Contents
