Samsung 580TVL User Manual

SALES NETWORK
• SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea
TEL : +82-31-740-8151~8 FAX : +82-31-740-8145
• SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
www.samsungtechwin.com P/No. : Z6806089001A
VAN 08. 04
www.samsungcctv.com
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.
Warnings & Cautions
This information is provided to ensure your safety and to prevent any losses, financial or
otherwise. Please read it carefully and use the product accordingly.
* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such as an
aerial ladder while providing after-sales service shall be at your expense.
* Separate the power plug when thunder crashes or lighting flashes.
* This product is support equipment for surveillance system. Therefore, we can't compensate for material loss and/or
personal injuries by robbery, fire, natural disaster or something like this type.
Warning/Attention/Special Mark Messages
Ignoring this information may result in
Ignoring this information may result in
material loss and/or serious personal
material loss and/or a slight injuries.
injuries including death.
Indicates "Never Allowed." Indicates "No Disassembling."
MINI DOME CAMERA 5 USER'S MANUAL
High Resolution Mini Dome Camera SID-53/56 User's Manual
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
MINI DOME CAMERA 1 USER'S MANUAL
Precautions
Do not install under extreme Do not install in high humidity
temperature conditions. environment.
Use only under temperature conditions between May lower image quality.
-10˚C and +50˚C. Provide good ventilation when
using in high temperature conditions.
Do not install under unstable
Avoid touching the camera lens.
lighting conditions.
Severe lighting changes or flickering may hinder The lens is the most important component of the
normal camera operation. camera. Be careful not to smear it with fingerprints.
Do not install under unstable
Avoid touching the camera lens.
lighting conditions.
May cause a product malfunction. May damage the CCD.
MINI DOME CAMERA 6 USER'S MANUAL
The lightning flash with arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
INFORMATION-This equipment has been tested and found to comply with limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will required to correct the interference at his own expense.
WARNING - Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
CAUTION : To prevent electric shock and risk of fire hazards:
Do NOT use other than specified power source.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and should conform to all
local codes.
ENGLISH
Do not expose the camera to Notes
radioactivity.
• If the camera is exposed to spotlight or object
reflecting the strong light, smear or blooming
may occur.
• Please check the power whether it satisfies
the normal specification before connecting
the camera.
If it is exposed to radioactivity, For heated CCD,
it will be out of order.
Getting to Know Your Camera
Front Bottom
Tilt Base
You can adjust up and
down the camera
(20˚~90˚).
Pan Base
You can rotate the lens
from 360˚
MINI DOME CAMERA 7 USER'S MANUAL
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and proper input power voltage. In
order that you can understand this manual thoroughly, we'll introduce our model description.
SID-53 SERIES, 56 SERIES
• NTSC models : SID-53N, SID-56N • PAL models : SID-53P, SID-56P
Model Description
• SID-53X SID-56X • SIGNAL SYSTEM
Signal system
Features
Ultra High Resolution
By adopting a diagonal 6mm(1/3") 410,000(NTSC) pixel, 470,000(PAL) pixel SONY CCD, the
camera produces clear picture quality with a horizontal resolution of 580 TV lines for color.
Excellent Sensitivity
The built-in high sensitivity COLOR CCD enable a clear image even in 0.04 Lux or lower
illumination.
SSNR (Samsung Super Noise Reduction) Function
The high performance WIN-IV DSP chip dramatically reduces the gain noise in digital image
processing, producing clear, sharp images in low lighting environments.
Pan and Tilt
Pan and tilt are available after installing camera.
MINI DOME CAMERA
Accessories
Quick Install Guide
User's Manual
Installation
Installing Camera
1. Fix the camera to a ceiling using two screws.
2. After fixing it, adjust its pan base and tilt base
properly.
3. After setting them, secure the shield
BNC Jack
case and dome-cover.
Power Input
Terminal
Shield Case
Dome Cover
MINI DOME CAMERA
N NTSC Model
P PAL Model
4 USER'S MANUAL
M4 Taping
Template
Screw 2EA
Hole
Screw
8 USER'S MANUAL