Define Ha Hpss Verification Method; Figure H-14 Adding A Custom Verification Method - IBM Hub/Switch Installation Manual

Appendix G High Availability
G.5.2.5 Bring Up the Cluster (just to test that it works)
Now bring the cluster back up using the instructions in Section G.10.1: Startup the Cluster on page
570.
When the cluster is active again, HPSS will be fully operational. It will be able to service requests
immediately, and all an administrator needs to do is start an SSM session to begin administering
the system.
G.5.3 Define HA HPSS Verification Method
HACMP has the capability to verify its own configuration, to a certain extent. As an extension to
this capability, the hpss_verify.ksh will aid in finding potential problems with an HA HPSS
configuration.
Setup custom HA HPSS verification using:
% smitty hacmp
Cluster Configuration
-> Cluster Verification
564
-> Define Custom Verification Method
-> Add a Custom Verification Method
Figure H-14 Adding a Custom Verification Method
September 2002 HPSS Installation Guide
Release 4.5, Revision 2