Honda 2000 Accord Sedan Owner's Manual page 234

Main Menu
Table of Contents
The spark plugs in your car should
be replaced according to the time
and distance recommendation s in
the maintenance schedule.
Replacement
HOLDING CLIP
1. Loosen the two holding clips by
turning the heads one-quarter turn
counterclockwis e with a flat-tipped
screwdriver. Remove the cover on
the front cylinder bank by pulling
it straight up.
2. Clean up any dirt and oil that have
collected around the ignition coils.
3. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
Spark Plugs (6-cylinder Models)
HEXAGON SOCKET HEAD CAP BOLT
4. Use a wrench to remove the
hexagon socket head cap bolt
holding the ignition coil. Remove
the ignition coil by pulling it
straight out.
5. Remove the spark plug with
a five-eighths inch (16 mm) spark
plug socket.
CONTINUED
Maintenance