Table of Contents
Advertisement
Timer
The timer can be used in two different ways:
To switch a hotplate off automatically
■
As a kitchen timer
■
Automatic hotplate switch-off
Enter a cooking time for the relevant hotplate. When the
cooking time has elapsed, the hotplate switches off
automatically.
Setting the cooking time
The hotplate must be selected and set.
Touch the
symbol twice. The
0
1.
hotplate lights up. The
r
in the timer display.
PLQ
[
Within the next 10 seconds, set the desired cooking time
2.
from the range of settings.
PLQ
The cooking time counts down.
When the cooking time has elapsed
When the cooking time has elapsed, the hotplate switches off.
.
lights up on the hotplate indicator. A signal sounds.
‹
‹
Automatic time limit
If a hotplate is in use for a long time without the setting being
changed, the automatic time limit is activated.
The hotplate stops heating.
indicator.
Wipe protection
If you wipe over the control panel while the hob is switched on,
settings may be altered.
To prevent this from happening, your hob has a wipe protection
function. Touch the
symbol. A signal sounds. The control
-
indicator for the desired
‹
symbol appears and
lights up
‹‹
lights up in the hotplate
"‰
lights up on the timer display for 10 seconds. Touch the
symbol. The displays go out and the acoustic signal ceases.
Changing or cancelling the cooking time
Select the hotplate and touch the
cooking time or set to
Notes
If you have set the kitchen timer, the time on the kitchen timer
■
will always be shown on the timer display. To call up the
cooking time for a hotplate, select the hotplate and touch the
symbol twice. The cooking time appears for 10 seconds in
0
the timer display.
If you have set cooking times for several hotplates, the
■
cooking time for the selected hotplate always appears in the
timer display.
You can set a cooking time of up to 99 minutes.
■
Automatic timer
You can use this function to preselect a cooking time for all
hotplates. Each time a hotplate is switched on, the preselected
cooking then counts down. When the cooking time has
elapsed, the hotplate switches off automatically.
You can find out how to switch on the automatic timer in the
Basic settings section.
Note: You can change the cooking time for a hotplate or switch
off the automatic timer for the hotplates.
Select the hotplate and touch the
cooking time or set to
Kitchen timer
You can use the kitchen timer to set a time of up to 99 minutes.
It runs independently of all the other settings.
Setting procedure
Touch the
0
1.
lights up.
‹‹
Set the desired time in the settings range.
2.
The timer starts counting down after a few seconds.
When the time has elapsed
A signal sounds once the time has elapsed.
the timer display. The
up. After 10 seconds, the indicator switches off.
Changing the time
‹‹
Touch the
0
lights up. Set the desired time in the settings range.
The display goes out when you touch any control. You can
make new settings.
When the time limit is activated depends on the heat setting
selected (1 to 10 hours).
panel is locked for 30 seconds. You can now wipe over the
control panel without altering any settings.
Note: The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
symbol twice. Change the
0
‹‹
in the settings area.
symbol twice. Change the
0
‹‹
in the settings area.
symbol, the
indicator for the kitchen timer
V
lights up on the timer display.
V
indicator for the kitchen timer lights
symbol, the
V
indicator for the kitchen timer
0
‹‹
lights up on
9
Advertisement
Table of Contents
