Bissell BigGreen User Manual page 8

M
aintenance and care
Clear Fan Chamber
The removable clear fan chamber enables the
user of the vacuum cleaner to observe if any
obstructions, dirt buildup, broken fan, broken
belt, or any other maintenance issue needs to
be addressed. We recommend that a qualified
vacuum repair specialist at your local service
center repair any maintenance issues that you
may have.
Brush Roll Belt
*Replace the belt if it is stretched,
cracked or looks worn.
1. Push the metal locks to remove the metal
plate on the bottom of the vacuum.
2. Remove the belt from the pulley. Remove
the brush roll by lifting up, and then take
off belt.
3. Place the new belt on center of brush roll.
4. Place the brush roll back in the vacuum
and align the belt with the belt guide.
5. Pull belt over the pulley and rotate the
pulley to make sure belt is smoothly
riding on motor pulley.
6. Place the metal plate back onto the bottom
of the vacuum and lock into place with
both locks.
NOTE: Turn off the switch and
unplug the electrical cord
8
w w w . b i s s e l l c o m m e r c i a l . c o m
CAUTION:
Turn off switch and unplug
cord before replacing belt.
Belt pulleys can become hot
during normal use. To prevent
burns, avoid touching the
belt pulley when servicing
the drive belt.
1.
2a.
2b.
3.
1 - 8 5 5 - 5 4 4 - 7 3 3 6